#[repr(transparent)]
pub struct BaseEffect { /* private fields */ }
Expand description

A BaseEffect is some operation that applies an effect to the data it receives.

Time Effects

Some operations will change the timing of the stream data they receive in some way. In particular, the gst::Element that they wrap could alter the times of the segment they receive in a gst::EventType::Segment event, or the times of a seek they receive in a gst::EventType::Seek event. Such operations would be considered time effects since they translate the times they receive on their source to different times at their sink, and vis versa. This introduces two sets of time coordinates for the event: (internal) sink coordinates and (internal) source coordinates, where segment times are translated from the sink coordinates to the source coordinates, and seek times are translated from the source coordinates to the sink coordinates.

If you use such an effect in GES, you will need to inform GES of the properties that control the timing with BaseEffectExt::register_time_property(), and the effect’s timing behaviour using ges_base_effect_set_time_translation_funcs().

Note that a time effect should not have its property::TrackElement::has-internal-source set to true.

In addition, note that GES only fully supports time effects whose mapping from the source to sink coordinates (those applied to seeks) obeys:

  • Maps the time 0 to 0. So initial time-shifting effects are excluded.
  • Is monotonically increasing. So reversing effects, and effects that jump backwards in the stream are excluded.
  • Can handle a reasonable GstClockTime, relative to the project. So this would exclude a time effect with an extremely large speed-up that would cause the converted GstClockTime seeks to overflow.
  • Is ‘continuously reversible’. This essentially means that for every time in the sink coordinates, we can, to ‘good enough’ accuracy, calculate the corresponding time in the source coordinates. Moreover, this should correspond to how segment times are translated from sink to source.
  • Only depends on the registered time properties, rather than the state of the gst::Element or the data it receives. This would exclude, say, an effect that would speedup if there is more red in the image it receives.

Note that a constant-rate-change effect that is not extremely fast or slow would satisfy these conditions. For such effects, you may wish to use ges_effect_class_register_rate_property().

This is an Abstract Base Class, you cannot instantiate it.

Implements

BaseEffectExt, [OperationExt][trait@crate::prelude::OperationExt], TrackElementExt, TimelineElementExt, glib::ObjectExt, ExtractableExt, MetaContainerExt, [TimelineElementExtManual][trait@crate::prelude::TimelineElementExtManual]

Implementations

Trait Implementations

Returns a copy of the value. Read more

Performs copy-assignment from source. Read more

Formats the value using the given formatter. Read more

Feeds this value into the given Hasher. Read more

Feeds a slice of this type into the given Hasher. Read more

This method returns an Ordering between self and other. Read more

Compares and returns the maximum of two values. Read more

Compares and returns the minimum of two values. Read more

Restrict a value to a certain interval. Read more

This method tests for self and other values to be equal, and is used by ==. Read more

This method tests for !=.

This method returns an ordering between self and other values if one exists. Read more

This method tests less than (for self and other) and is used by the < operator. Read more

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

This method tests greater than (for self and other) and is used by the > operator. Read more

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

Returns the type identifier of Self.

Auto Trait Implementations

Blanket Implementations

Gets the TypeId of self. Read more

Immutably borrows from an owned value. Read more

Mutably borrows from an owned value. Read more

Upcasts an object to a superclass or interface T. Read more

Upcasts an object to a reference of its superclass or interface T. Read more

Tries to downcast to a subclass or interface implementor T. Read more

Tries to downcast to a reference of its subclass or interface implementor T. Read more

Tries to cast to an object of type T. This handles upcasting, downcasting and casting between interface and interface implementors. All checks are performed at runtime, while downcast and upcast will do many checks at compile-time already. Read more

Tries to cast to reference to an object of type T. This handles upcasting, downcasting and casting between interface and interface implementors. All checks are performed at runtime, while downcast and upcast will do many checks at compile-time already. Read more

Casts to T unconditionally. Read more

Casts to &T unconditionally. Read more

Performs the conversion.

Performs the conversion.

Returns true if the object is an instance of (can be cast to) T.

Returns the type of the object.

Returns the ObjectClass of the object. Read more

Returns the class of the object.

Returns the class of the object in the given type T. Read more

Returns the interface T of the object. Read more

Similar to Self::set_property but fails instead of panicking.

Sets the property property_name of the object to value value. Read more

Similar to Self::set_property but fails instead of panicking.

Sets the property property_name of the object to value value. Read more

Similar to Self::set_properties but fails instead of panicking.

Sets multiple properties of the object at once. Read more

Similar to Self::set_properties_from_value but fails instead of panicking.

Sets multiple properties of the object at once. Read more

Similar to Self::property but fails instead of panicking.

Gets the property property_name of the object and cast it to the type V. Read more

Similar to Self::property_value but fails instead of panicking.

Gets the property property_name of the object. Read more

Check if the object has a property property_name of the given type_. Read more

Get the type of the property property_name of this object. Read more

Get the ParamSpec of the property property_name of this object.

Return all ParamSpec of the properties of this object.

Freeze all property notifications until the return guard object is dropped. Read more

Set arbitrary data on this object with the given key. Read more

Return previously set arbitrary data of this object with the given key. Read more

Retrieve previously set arbitrary data of this object with the given key. Read more

Set arbitrary data on this object with the given key. Read more

Return previously set arbitrary data of this object with the given key. Read more

Retrieve previously set arbitrary data of this object with the given key. Read more

Block a given signal handler. Read more

Unblock a given signal handler.

Stop emission of the currently emitted signal.

Stop emission of the currently emitted signal by the (possibly detailed) signal name.

Similar to Self::connect but fails instead of panicking.

Connect to the signal signal_name on this object. Read more

Similar to Self::connect_id but fails instead of panicking.

Connect to the signal signal_id on this object. Read more

Similar to Self::connect_local but fails instead of panicking.

Connect to the signal signal_name on this object. Read more

Similar to Self::connect_local_id but fails instead of panicking.

Connect to the signal signal_id on this object. Read more

Similar to Self::connect_unsafe but fails instead of panicking.

Connect to the signal signal_name on this object. Read more

Similar to Self::connect_unsafe_id but fails instead of panicking.

Similar to Self::connect_closure but fails instead of panicking.

Connect a closure to the signal signal_name on this object. Read more

Similar to Self::connect_closure_id but fails instead of panicking.

Connect a closure to the signal signal_id on this object. Read more

Limits the lifetime of closure to the lifetime of the object. When the object’s reference count drops to zero, the closure will be invalidated. An invalidated closure will ignore any calls to Closure::invoke. Read more

Connect to the signal signal_id on this object. Read more

Similar to Self::emit but fails instead of panicking.

Emit signal by signal id. Read more

Similar to Self::emit_with_values but fails instead of panicking.

Same as Self::emit but takes Value for the arguments.

Similar to Self::emit_by_name but fails instead of panicking.

Emit signal by its name. Read more

Similar to Self::emit_by_name_with_values but fails instead of panicking.

Emit signal by its name. Read more

Similar to Self::emit_by_name_with_details but fails instead of panicking.

Emit signal by its name with details. Read more

Similar to Self::emit_by_name_with_details_and_values but fails instead of panicking.

Emit signal by its name with details. Read more

Similar to Self::emit_with_details but fails instead of panicking.

Emit signal by signal id with details. Read more

Similar to Self::emit_with_details_and_values but fails instead of panicking.

Emit signal by signal id with details. Read more

Disconnect a previously connected signal handler.

Connect to the notify signal of the object. Read more

Connect to the notify signal of the object. Read more

Connect to the notify signal of the object. Read more

Notify that the given property has changed its value. Read more

Notify that the given property has changed its value. Read more

Downgrade this object to a weak reference.

Bind property source_property on this object to the target_property on the target object. Read more

Returns the strong reference count of this object.

Ensures that the type has been registered with the type system.

The resulting type after obtaining ownership.

Creates owned data from borrowed data, usually by cloning. Read more

🔬 This is a nightly-only experimental API. (toowned_clone_into)

Uses borrowed data to replace owned data, usually by cloning. Read more

Returns a SendValue clone of self.

The type returned in the event of a conversion error.

Performs the conversion.

The type returned in the event of a conversion error.

Performs the conversion.