// This file was generated by gir (https://github.com/gtk-rs/gir)
// from gir-files (https://github.com/gtk-rs/gir-files)
// from gst-gir-files (https://gitlab.freedesktop.org/gstreamer/gir-files-rs.git)
// DO NOT EDIT

use crate::{ClockTime, Message, Object};
use glib::{
    prelude::*,
    signal::{connect_raw, SignalHandlerId},
    translate::*,
};
use std::boxed::Box as Box_;

glib::wrapper! {
    /// The [`Bus`][crate::Bus] is an object responsible for delivering [`Message`][crate::Message] packets in
    /// a first-in first-out way from the streaming threads (see [`Task`][crate::Task]) to the
    /// application.
    ///
    /// Since the application typically only wants to deal with delivery of these
    /// messages from one thread, the GstBus will marshall the messages between
    /// different threads. This is important since the actual streaming of media
    /// is done in another thread than the application.
    ///
    /// The GstBus provides support for [`glib::Source`][crate::glib::Source] based notifications. This makes it
    /// possible to handle the delivery in the glib `GMainLoop`.
    ///
    /// The [`glib::Source`][crate::glib::Source] callback function `gst_bus_async_signal_func()` can be used to
    /// convert all bus messages into signal emissions.
    ///
    /// A message is posted on the bus with the [`post()`][Self::post()] method. With the
    /// [`peek()`][Self::peek()] and [`pop()`][Self::pop()] methods one can look at or retrieve a
    /// previously posted message.
    ///
    /// The bus can be polled with the [`poll()`][Self::poll()] method. This methods blocks
    /// up to the specified timeout value until one of the specified messages types
    /// is posted on the bus. The application can then [`pop()`][Self::pop()] the messages
    /// from the bus to handle them.
    /// Alternatively the application can register an asynchronous bus function
    /// using [`add_watch_full()`][Self::add_watch_full()] or [`add_watch()`][Self::add_watch()]. This function will
    /// install a [`glib::Source`][crate::glib::Source] in the default glib main loop and will deliver messages
    /// a short while after they have been posted. Note that the main loop should
    /// be running for the asynchronous callbacks.
    ///
    /// It is also possible to get messages from the bus without any thread
    /// marshalling with the [`set_sync_handler()`][Self::set_sync_handler()] method. This makes it
    /// possible to react to a message in the same thread that posted the
    /// message on the bus. This should only be used if the application is able
    /// to deal with messages from different threads.
    ///
    /// Every [`Pipeline`][crate::Pipeline] has one bus.
    ///
    /// Note that a [`Pipeline`][crate::Pipeline] will set its bus into flushing state when changing
    /// from READY to NULL state.
    ///
    /// ## Properties
    ///
    ///
    /// #### `enable-async`
    ///  Enables async message delivery support for bus watches,
    /// [`Bus::pop()`][crate::Bus::pop()] and similar API. Without this only the
    /// synchronous message handlers are called.
    ///
    /// This property is used to create the child element buses
    /// in [`Bin`][crate::Bin].
    ///
    /// Writeable | Construct Only
    /// <details><summary><h4>Object</h4></summary>
    ///
    ///
    /// #### `name`
    ///  Readable | Writeable | Construct
    ///
    ///
    /// #### `parent`
    ///  The parent of the object. Please note, that when changing the 'parent'
    /// property, we don't emit [`notify`][struct@crate::glib::Object#notify] and [`deep-notify`][struct@crate::Object#deep-notify]
    /// signals due to locking issues. In some cases one can use
    /// [`element-added`][struct@crate::Bin#element-added] or [`element-removed`][struct@crate::Bin#element-removed] signals on the parent to
    /// achieve a similar effect.
    ///
    /// Readable | Writeable
    /// </details>
    ///
    /// ## Signals
    ///
    ///
    /// #### `message`
    ///  A message has been posted on the bus. This signal is emitted from a
    /// [`glib::Source`][crate::glib::Source] added to the mainloop. this signal will only be emitted when
    /// there is a `GMainLoop` running.
    ///
    /// Detailed
    ///
    ///
    /// #### `sync-message`
    ///  A message has been posted on the bus. This signal is emitted from the
    /// thread that posted the message so one has to be careful with locking.
    ///
    /// This signal will not be emitted by default, you have to call
    /// [`Bus::enable_sync_message_emission()`][crate::Bus::enable_sync_message_emission()] before.
    ///
    /// Detailed
    /// <details><summary><h4>Object</h4></summary>
    ///
    ///
    /// #### `deep-notify`
    ///  The deep notify signal is used to be notified of property changes. It is
    /// typically attached to the toplevel bin to receive notifications from all
    /// the elements contained in that bin.
    ///
    /// Detailed
    /// </details>
    ///
    /// # Implements
    ///
    /// [`GstObjectExt`][trait@crate::prelude::GstObjectExt], [`trait@glib::ObjectExt`]
    #[doc(alias = "GstBus")]
    pub struct Bus(Object<ffi::GstBus, ffi::GstBusClass>) @extends Object;

    match fn {
        type_ => || ffi::gst_bus_get_type(),
    }
}

impl Bus {
    /// Creates a new [`Bus`][crate::Bus] instance.
    ///
    /// # Returns
    ///
    /// a new [`Bus`][crate::Bus] instance
    #[doc(alias = "gst_bus_new")]
    pub fn new() -> Bus {
        assert_initialized_main_thread!();
        unsafe { from_glib_full(ffi::gst_bus_new()) }
    }

    /// Adds a bus signal watch to the default main context with the default priority
    /// ( `G_PRIORITY_DEFAULT` ). It is also possible to use a non-default
    /// main context set up using [`glib::MainContext::push_thread_default()`][crate::glib::MainContext::push_thread_default()] (before
    /// one had to create a bus watch source and attach it to the desired main
    /// context 'manually').
    ///
    /// After calling this statement, the bus will emit the "message" signal for each
    /// message posted on the bus.
    ///
    /// This function may be called multiple times. To clean up, the caller is
    /// responsible for calling [`remove_signal_watch()`][Self::remove_signal_watch()] as many times as this
    /// function is called.
    #[doc(alias = "gst_bus_add_signal_watch")]
    pub fn add_signal_watch(&self) {
        unsafe {
            ffi::gst_bus_add_signal_watch(self.to_glib_none().0);
        }
    }

    //#[doc(alias = "gst_bus_async_signal_func")]
    //pub fn async_signal_func(&self, message: &Message, data: /*Unimplemented*/Option<Basic: Pointer>) -> bool {
    //    unsafe { TODO: call ffi:gst_bus_async_signal_func() }
    //}

    /// Instructs GStreamer to stop emitting the "sync-message" signal for this bus.
    /// See [`enable_sync_message_emission()`][Self::enable_sync_message_emission()] for more information.
    ///
    /// In the event that multiple pieces of code have called
    /// [`enable_sync_message_emission()`][Self::enable_sync_message_emission()], the sync-message emissions will only
    /// be stopped after all calls to [`enable_sync_message_emission()`][Self::enable_sync_message_emission()] were
    /// "cancelled" by calling this function. In this way the semantics are exactly
    /// the same as `gst_object_ref()` that which calls enable should also call
    /// disable.
    #[doc(alias = "gst_bus_disable_sync_message_emission")]
    pub fn disable_sync_message_emission(&self) {
        unsafe {
            ffi::gst_bus_disable_sync_message_emission(self.to_glib_none().0);
        }
    }

    /// Instructs GStreamer to emit the "sync-message" signal after running the bus's
    /// sync handler. This function is here so that code can ensure that they can
    /// synchronously receive messages without having to affect what the bin's sync
    /// handler is.
    ///
    /// This function may be called multiple times. To clean up, the caller is
    /// responsible for calling [`disable_sync_message_emission()`][Self::disable_sync_message_emission()] as many times
    /// as this function is called.
    ///
    /// While this function looks similar to [`add_signal_watch()`][Self::add_signal_watch()], it is not
    /// exactly the same -- this function enables *synchronous* emission of
    /// signals when messages arrive; [`add_signal_watch()`][Self::add_signal_watch()] adds an idle callback
    /// to pop messages off the bus *asynchronously*. The sync-message signal
    /// comes from the thread of whatever object posted the message; the "message"
    /// signal is marshalled to the main thread via the `GMainLoop`.
    #[doc(alias = "gst_bus_enable_sync_message_emission")]
    pub fn enable_sync_message_emission(&self) {
        unsafe {
            ffi::gst_bus_enable_sync_message_emission(self.to_glib_none().0);
        }
    }

    //#[doc(alias = "gst_bus_get_pollfd")]
    //#[doc(alias = "get_pollfd")]
    //pub fn pollfd(&self, fd: /*Ignored*/glib::PollFD) {
    //    unsafe { TODO: call ffi:gst_bus_get_pollfd() }
    //}

    /// Checks if there are pending messages on the bus that
    /// should be handled.
    ///
    /// # Returns
    ///
    /// [`true`] if there are messages on the bus to be handled, [`false`]
    /// otherwise.
    #[doc(alias = "gst_bus_have_pending")]
    pub fn have_pending(&self) -> bool {
        unsafe { from_glib(ffi::gst_bus_have_pending(self.to_glib_none().0)) }
    }

    /// Peeks the message on the top of the bus' queue. The message will remain
    /// on the bus' message queue.
    ///
    /// # Returns
    ///
    /// the [`Message`][crate::Message] that is on the
    ///  bus, or [`None`] if the bus is empty.
    #[doc(alias = "gst_bus_peek")]
    pub fn peek(&self) -> Option<Message> {
        unsafe { from_glib_full(ffi::gst_bus_peek(self.to_glib_none().0)) }
    }

    /// Gets a message from the bus.
    ///
    /// # Returns
    ///
    /// the [`Message`][crate::Message] that is on the
    ///  bus, or [`None`] if the bus is empty.
    #[doc(alias = "gst_bus_pop")]
    pub fn pop(&self) -> Option<Message> {
        unsafe { from_glib_full(ffi::gst_bus_pop(self.to_glib_none().0)) }
    }

    /// Posts a message on the given bus. Ownership of the message
    /// is taken by the bus.
    /// ## `message`
    /// the [`Message`][crate::Message] to post
    ///
    /// # Returns
    ///
    /// [`true`] if the message could be posted, [`false`] if the bus is flushing.
    #[doc(alias = "gst_bus_post")]
    pub fn post(&self, message: Message) -> Result<(), glib::error::BoolError> {
        unsafe {
            glib::result_from_gboolean!(
                ffi::gst_bus_post(self.to_glib_none().0, message.into_glib_ptr()),
                "Failed to post message"
            )
        }
    }

    /// Removes a signal watch previously added with [`add_signal_watch()`][Self::add_signal_watch()].
    #[doc(alias = "gst_bus_remove_signal_watch")]
    pub fn remove_signal_watch(&self) {
        unsafe {
            ffi::gst_bus_remove_signal_watch(self.to_glib_none().0);
        }
    }

    /// Removes an installed bus watch from `self`.
    ///
    /// # Returns
    ///
    /// [`true`] on success or [`false`] if `self` has no event source.
    #[doc(alias = "gst_bus_remove_watch")]
    #[allow(dead_code)]
    pub(crate) fn remove_watch(&self) -> Result<(), glib::error::BoolError> {
        unsafe {
            glib::result_from_gboolean!(
                ffi::gst_bus_remove_watch(self.to_glib_none().0),
                "Bus has no event source"
            )
        }
    }

    /// If `flushing`, flushes out and unrefs any messages queued in the bus. Releases
    /// references to the message origin objects. Will flush future messages until
    /// [`set_flushing()`][Self::set_flushing()] sets `flushing` to [`false`].
    /// ## `flushing`
    /// whether or not to flush the bus
    #[doc(alias = "gst_bus_set_flushing")]
    pub fn set_flushing(&self, flushing: bool) {
        unsafe {
            ffi::gst_bus_set_flushing(self.to_glib_none().0, flushing.into_glib());
        }
    }

    //#[doc(alias = "gst_bus_sync_signal_handler")]
    //pub fn sync_signal_handler(&self, message: &Message, data: /*Unimplemented*/Option<Basic: Pointer>) -> BusSyncReply {
    //    unsafe { TODO: call ffi:gst_bus_sync_signal_handler() }
    //}

    /// Gets a message from the bus, waiting up to the specified timeout.
    ///
    /// If `timeout` is 0, this function behaves like [`pop()`][Self::pop()]. If `timeout` is
    /// `GST_CLOCK_TIME_NONE`, this function will block forever until a message was
    /// posted on the bus.
    /// ## `timeout`
    /// a timeout
    ///
    /// # Returns
    ///
    /// the [`Message`][crate::Message] that is on the
    ///  bus after the specified timeout or [`None`] if the bus is empty
    ///  after the timeout expired.
    #[doc(alias = "gst_bus_timed_pop")]
    pub fn timed_pop(&self, timeout: impl Into<Option<ClockTime>>) -> Option<Message> {
        unsafe {
            from_glib_full(ffi::gst_bus_timed_pop(
                self.to_glib_none().0,
                timeout.into().into_glib(),
            ))
        }
    }

    /// A message has been posted on the bus. This signal is emitted from a
    /// [`glib::Source`][crate::glib::Source] added to the mainloop. this signal will only be emitted when
    /// there is a `GMainLoop` running.
    /// ## `message`
    /// the message that has been posted asynchronously
    #[doc(alias = "message")]
    pub fn connect_message<F: Fn(&Self, &Message) + Send + 'static>(
        &self,
        detail: Option<&str>,
        f: F,
    ) -> SignalHandlerId {
        unsafe extern "C" fn message_trampoline<F: Fn(&Bus, &Message) + Send + 'static>(
            this: *mut ffi::GstBus,
            message: *mut ffi::GstMessage,
            f: glib::ffi::gpointer,
        ) {
            let f: &F = &*(f as *const F);
            f(&from_glib_borrow(this), &from_glib_borrow(message))
        }
        unsafe {
            let f: Box_<F> = Box_::new(f);
            let detailed_signal_name = detail.map(|name| format!("message::{name}\0"));
            let signal_name: &[u8] = detailed_signal_name
                .as_ref()
                .map_or(&b"message\0"[..], |n| n.as_bytes());
            connect_raw(
                self.as_ptr() as *mut _,
                signal_name.as_ptr() as *const _,
                Some(std::mem::transmute::<_, unsafe extern "C" fn()>(
                    message_trampoline::<F> as *const (),
                )),
                Box_::into_raw(f),
            )
        }
    }

    /// A message has been posted on the bus. This signal is emitted from the
    /// thread that posted the message so one has to be careful with locking.
    ///
    /// This signal will not be emitted by default, you have to call
    /// [`enable_sync_message_emission()`][Self::enable_sync_message_emission()] before.
    /// ## `message`
    /// the message that has been posted synchronously
    #[doc(alias = "sync-message")]
    pub fn connect_sync_message<F: Fn(&Self, &Message) + Send + Sync + 'static>(
        &self,
        detail: Option<&str>,
        f: F,
    ) -> SignalHandlerId {
        unsafe extern "C" fn sync_message_trampoline<
            F: Fn(&Bus, &Message) + Send + Sync + 'static,
        >(
            this: *mut ffi::GstBus,
            message: *mut ffi::GstMessage,
            f: glib::ffi::gpointer,
        ) {
            let f: &F = &*(f as *const F);
            f(&from_glib_borrow(this), &from_glib_borrow(message))
        }
        unsafe {
            let f: Box_<F> = Box_::new(f);
            let detailed_signal_name = detail.map(|name| format!("sync-message::{name}\0"));
            let signal_name: &[u8] = detailed_signal_name
                .as_ref()
                .map_or(&b"sync-message\0"[..], |n| n.as_bytes());
            connect_raw(
                self.as_ptr() as *mut _,
                signal_name.as_ptr() as *const _,
                Some(std::mem::transmute::<_, unsafe extern "C" fn()>(
                    sync_message_trampoline::<F> as *const (),
                )),
                Box_::into_raw(f),
            )
        }
    }
}

impl Default for Bus {
    fn default() -> Self {
        Self::new()
    }
}

unsafe impl Send for Bus {}
unsafe impl Sync for Bus {}