// This file was generated by gir (https://github.com/gtk-rs/gir)
// from gir-files (https://github.com/gtk-rs/gir-files)
// from gst-gir-files (https://gitlab.freedesktop.org/gstreamer/gir-files-rs.git)
// DO NOT EDIT

use crate::{Container, Extractable, MetaContainer, TimelineElement};
use glib::translate::*;

glib::wrapper! {
    /// A [`Group`][crate::Group] controls one or more [`Container`][crate::Container]-s (usually [`Clip`][crate::Clip]-s,
    /// but it can also control other [`Group`][crate::Group]-s). Its children must share
    /// the same [`Timeline`][crate::Timeline], but can otherwise lie in separate [`Layer`][crate::Layer]-s
    /// and have different timings.
    ///
    /// To initialise a group, you may want to use [`Container::group()`][crate::Container::group()],
    /// and similarly use [`GESContainerExt::ungroup()`][crate::prelude::GESContainerExt::ungroup()] to dispose of it.
    ///
    /// A group will maintain the relative [`start`][struct@crate::TimelineElement#start] times of
    /// its children, as well as their relative layer [`priority`][struct@crate::Layer#priority].
    /// Therefore, if one of its children has its [`start`][struct@crate::TimelineElement#start]
    /// set, all other children will have their [`start`][struct@crate::TimelineElement#start]
    /// shifted by the same amount. Similarly, if one of its children moves to
    /// a new layer, the other children will also change layers to maintain the
    /// difference in their layer priorities. For example, if a child moves
    /// from a layer with [`priority`][struct@crate::Layer#priority] 1 to a layer with priority 3, then
    /// another child that was in a layer with priority 0 will move to the
    /// layer with priority 2.
    ///
    /// The [`start`][struct@crate::Group#start] of a group refers to the earliest start
    /// time of its children. If the group's [`start`][struct@crate::Group#start] is set, all the
    /// children will be shifted equally such that the earliest start time
    /// will match the set value. The [`duration`][struct@crate::Group#duration] of a group is the
    /// difference between the earliest start time and latest end time of its
    /// children. If the group's [`duration`][struct@crate::Group#duration] is increased, the children
    /// whose end time matches the end of the group will be extended
    /// accordingly. If it is decreased, then any child whose end time exceeds
    /// the new end time will also have their duration decreased accordingly.
    ///
    /// A group may span several layers, but for methods such as
    /// [`TimelineElementExt::layer_priority()`][crate::prelude::TimelineElementExt::layer_priority()] and
    /// [`TimelineElementExt::edit()`][crate::prelude::TimelineElementExt::edit()] a group is considered to have a layer
    /// priority that is the highest [`priority`][struct@crate::Layer#priority] (numerically, the
    /// smallest) of all the layers it spans.
    ///
    /// ## Properties
    ///
    ///
    /// #### `duration`
    ///  An overwrite of the [`duration`][struct@crate::TimelineElement#duration] property. For a
    /// [`Group`][crate::Group], this is the difference between the earliest
    /// [`start`][struct@crate::TimelineElement#start] time and the latest end time (given by
    /// [`start`][struct@crate::TimelineElement#start] + [`duration`][struct@crate::TimelineElement#duration]) amongst
    /// its children.
    ///
    /// Readable | Writeable
    ///
    ///
    /// #### `in-point`
    ///  An overwrite of the [`in-point`][struct@crate::TimelineElement#in-point] property. This has
    /// no meaning for a group and should not be set.
    ///
    /// Readable | Writeable
    ///
    ///
    /// #### `max-duration`
    ///  An overwrite of the [`max-duration`][struct@crate::TimelineElement#max-duration] property. This
    /// has no meaning for a group and should not be set.
    ///
    /// Readable | Writeable | Construct
    ///
    ///
    /// #### `priority`
    ///  An overwrite of the [`priority`][struct@crate::TimelineElement#priority] property.
    /// Setting [`TimelineElement`][crate::TimelineElement] priorities is deprecated as all priority
    /// management is now done by GES itself.
    ///
    /// Readable | Writeable
    ///
    ///
    /// #### `start`
    ///  An overwrite of the [`start`][struct@crate::TimelineElement#start] property. For a
    /// [`Group`][crate::Group], this is the earliest [`start`][struct@crate::TimelineElement#start] time
    /// amongst its children.
    ///
    /// Readable | Writeable
    /// <details><summary><h4>Container</h4></summary>
    ///
    ///
    /// #### `height`
    ///  The span of the container's children's [`priority`][struct@crate::TimelineElement#priority]
    /// values, which is the number of integers that lie between (inclusive)
    /// the minimum and maximum priorities found amongst the container's
    /// children (maximum - minimum + 1).
    ///
    /// Readable
    /// </details>
    /// <details><summary><h4>TimelineElement</h4></summary>
    ///
    ///
    /// #### `duration`
    ///  The duration that the element is in effect for in the timeline (a
    /// time difference in nanoseconds using the time coordinates of the
    /// timeline). For example, for a source element, this would determine
    /// for how long it should output its internal content for. For an
    /// operation element, this would determine for how long its effect
    /// should be applied to any source content.
    ///
    /// Readable | Writeable
    ///
    ///
    /// #### `in-point`
    ///  The initial offset to use internally when outputting content (in
    /// nanoseconds, but in the time coordinates of the internal content).
    ///
    /// For example, for a [`VideoUriSource`][crate::VideoUriSource] that references some media
    /// file, the "internal content" is the media file data, and the
    /// in-point would correspond to some timestamp in the media file.
    /// When playing the timeline, and when the element is first reached at
    /// timeline-time [`start`][struct@crate::TimelineElement#start], it will begin outputting the
    /// data from the timestamp in-point **onwards**, until it reaches the
    /// end of its [`duration`][struct@crate::TimelineElement#duration] in the timeline.
    ///
    /// For elements that have no internal content, this should be kept
    /// as 0.
    ///
    /// Readable | Writeable
    ///
    ///
    /// #### `max-duration`
    ///  The full duration of internal content that is available (a time
    /// difference in nanoseconds using the time coordinates of the internal
    /// content).
    ///
    /// This will act as a cap on the [`in-point`][struct@crate::TimelineElement#in-point] of the
    /// element (which is in the same time coordinates), and will sometimes
    /// be used to limit the [`duration`][struct@crate::TimelineElement#duration] of the element in
    /// the timeline.
    ///
    /// For example, for a [`VideoUriSource`][crate::VideoUriSource] that references some media
    /// file, this would be the length of the media file.
    ///
    /// For elements that have no internal content, or whose content is
    /// indefinite, this should be kept as `GST_CLOCK_TIME_NONE`.
    ///
    /// Readable | Writeable | Construct
    ///
    ///
    /// #### `name`
    ///  The name of the element. This should be unique within its timeline.
    ///
    /// Readable | Writeable | Construct
    ///
    ///
    /// #### `parent`
    ///  The parent container of the element.
    ///
    /// Readable | Writeable
    ///
    ///
    /// #### `priority`
    ///  The priority of the element.
    ///
    /// Readable | Writeable
    ///
    ///
    /// #### `serialize`
    ///  Whether the element should be serialized.
    ///
    /// Readable | Writeable
    ///
    ///
    /// #### `start`
    ///  The starting position of the element in the timeline (in nanoseconds
    /// and in the time coordinates of the timeline). For example, for a
    /// source element, this would determine the time at which it should
    /// start outputting its internal content. For an operation element, this
    /// would determine the time at which it should start applying its effect
    /// to any source content.
    ///
    /// Readable | Writeable
    ///
    ///
    /// #### `timeline`
    ///  The timeline that the element lies within.
    ///
    /// Readable | Writeable
    /// </details>
    ///
    /// # Implements
    ///
    /// [`GESContainerExt`][trait@crate::prelude::GESContainerExt], [`TimelineElementExt`][trait@crate::prelude::TimelineElementExt], [`trait@glib::ObjectExt`], [`ExtractableExt`][trait@crate::prelude::ExtractableExt], [`MetaContainerExt`][trait@crate::prelude::MetaContainerExt], [`TimelineElementExtManual`][trait@crate::prelude::TimelineElementExtManual]
    #[doc(alias = "GESGroup")]
    pub struct Group(Object<ffi::GESGroup, ffi::GESGroupClass>) @extends Container, TimelineElement, @implements Extractable, MetaContainer;

    match fn {
        type_ => || ffi::ges_group_get_type(),
    }
}

impl Group {
    pub const NONE: Option<&'static Group> = None;

    /// Created a new empty group. You may wish to use
    /// [`Container::group()`][crate::Container::group()] instead, which can return a different
    /// [`Container`][crate::Container] subclass if possible.
    ///
    /// # Returns
    ///
    /// The new empty group.
    #[doc(alias = "ges_group_new")]
    pub fn new() -> Group {
        assert_initialized_main_thread!();
        unsafe { from_glib_none(ffi::ges_group_new()) }
    }
}

impl Default for Group {
    fn default() -> Self {
        Self::new()
    }
}