pub struct TrackElementAsset { /* private fields */ }
Expand description

§Properties

§track-type

Readable | Writeable | Construct

Asset

§extractable-type

The Extractable object type that can be extracted from the asset.

Readable | Writeable | Construct Only

§id

The ID of the asset. This should be unique amongst all assets with the same extractable-type. Depending on the associated Extractable implementation, this id may convey some information about the glib::Object that should be extracted. Note that, as such, the ID will have an expected format, and you can not choose this value arbitrarily. By default, this will be set to the type name of the extractable-type, but you should check the documentation of the extractable type to see whether they differ from the default behaviour.

Readable | Writeable | Construct Only

§proxy

The default proxy for this asset, or None if it has no proxy. A proxy will act as a substitute for the original asset when the original is requested (see Asset::request()).

Setting this property will not usually remove the existing proxy, but will replace it as the default (see AssetExt::set_proxy()).

Readable | Writeable

§proxy-target

The asset that this asset is a proxy for, or None if it is not a proxy for another asset.

Note that even if this asset is acting as a proxy for another asset, but this asset is not the default proxy, then proxy-target will still point to this other asset. So you should check the proxy property of target-proxy before assuming it is the current default proxy for the target.

Note that the notify for this property is emitted after the proxy notify for the corresponding (if any) asset it is now the proxy of/no longer the proxy of.

Readable

§Implements

TrackElementAssetExt, AssetExt, [trait@glib::ObjectExt], MetaContainerExt

Implementations§

Trait Implementations§

source§

impl Clone for TrackElementAsset

source§

fn clone(&self) -> Self

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
source§

impl Debug for TrackElementAsset

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
source§

impl HasParamSpec for TrackElementAsset

§

type ParamSpec = ParamSpecObject

§

type SetValue = TrackElementAsset

Preferred value to be used as setter for the associated ParamSpec.
§

type BuilderFn = fn(_: &str) -> ParamSpecObjectBuilder<'_, TrackElementAsset>

source§

fn param_spec_builder() -> Self::BuilderFn

source§

impl Hash for TrackElementAsset

source§

fn hash<H>(&self, state: &mut H)
where H: Hasher,

Feeds this value into the given Hasher. Read more
1.3.0 · source§

fn hash_slice<H>(data: &[Self], state: &mut H)
where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher. Read more
source§

impl Ord for TrackElementAsset

source§

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other. Read more
1.21.0 · source§

fn max(self, other: Self) -> Self
where Self: Sized,

Compares and returns the maximum of two values. Read more
1.21.0 · source§

fn min(self, other: Self) -> Self
where Self: Sized,

Compares and returns the minimum of two values. Read more
1.50.0 · source§

fn clamp(self, min: Self, max: Self) -> Self
where Self: Sized + PartialOrd,

Restrict a value to a certain interval. Read more
source§

impl ParentClassIs for TrackElementAsset

source§

impl<OT: ObjectType> PartialEq<OT> for TrackElementAsset

source§

fn eq(&self, other: &OT) -> bool

This method tests for self and other values to be equal, and is used by ==.
1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
source§

impl<OT: ObjectType> PartialOrd<OT> for TrackElementAsset

source§

fn partial_cmp(&self, other: &OT) -> Option<Ordering>

This method returns an ordering between self and other values if one exists. Read more
1.0.0 · source§

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator. Read more
1.0.0 · source§

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more
1.0.0 · source§

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator. Read more
1.0.0 · source§

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more
source§

impl StaticType for TrackElementAsset

source§

fn static_type() -> Type

Returns the type identifier of Self.
source§

impl Eq for TrackElementAsset

source§

impl IsA<Asset> for TrackElementAsset

source§

impl IsA<MetaContainer> for TrackElementAsset

source§

impl IsA<TrackElementAsset> for EffectAsset

source§

impl IsA<TrackElementAsset> for UriSourceAsset

source§

impl Send for TrackElementAsset

source§

impl Sync for TrackElementAsset

Auto Trait Implementations§

Blanket Implementations§

source§

impl<T> Any for T
where T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<O> AssetExt for O
where O: IsA<Asset>,

source§

fn extract(&self) -> Result<Extractable, Error>

Extracts a new extractable-type object from the asset. The id of the asset may determine the properties and state of the newly created object. Read more
source§

fn error(&self) -> Option<Error>

Retrieve the error that was set on the asset when it was loaded. Read more
source§

fn extractable_type(&self) -> Type

Gets the extractable-type of the asset. Read more
source§

fn id(&self) -> GString

Gets the id of the asset. Read more
source§

fn proxy(&self) -> Option<Asset>

Gets the default proxy of the asset. Read more
source§

fn proxy_target(&self) -> Option<Asset>

Gets the proxy-target of the asset. Read more
source§

fn list_proxies(&self) -> Vec<Asset>

Get all the proxies that the asset has. The first item of the list will be the default proxy. The second will be the proxy that is ‘next in line’ to be default, and so on. Read more
source§

fn set_proxy(&self, proxy: Option<&impl IsA<Asset>>) -> Result<(), BoolError>

Sets the proxy for the asset. Read more
source§

fn unproxy(&self, proxy: &impl IsA<Asset>) -> Result<(), BoolError>

Removes the proxy from the available list of proxies for the asset. If the given proxy is the default proxy of the list, then the next proxy in the available list (see list_proxies()) will become the default. If there are no other proxies, then the asset will no longer have a default proxy. Read more
source§

fn connect_proxy_notify<F: Fn(&Self) + Send + Sync + 'static>( &self, f: F ) -> SignalHandlerId

source§

fn connect_proxy_target_notify<F: Fn(&Self) + Send + Sync + 'static>( &self, f: F ) -> SignalHandlerId

source§

impl<T> Borrow<T> for T
where T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> Cast for T
where T: ObjectType,

source§

fn upcast<T>(self) -> T
where T: ObjectType, Self: IsA<T>,

Upcasts an object to a superclass or interface T. Read more
source§

fn upcast_ref<T>(&self) -> &T
where T: ObjectType, Self: IsA<T>,

Upcasts an object to a reference of its superclass or interface T. Read more
source§

fn downcast<T>(self) -> Result<T, Self>
where T: ObjectType, Self: MayDowncastTo<T>,

Tries to downcast to a subclass or interface implementor T. Read more
source§

fn downcast_ref<T>(&self) -> Option<&T>
where T: ObjectType, Self: MayDowncastTo<T>,

Tries to downcast to a reference of its subclass or interface implementor T. Read more
source§

fn dynamic_cast<T>(self) -> Result<T, Self>
where T: ObjectType,

Tries to cast to an object of type T. This handles upcasting, downcasting and casting between interface and interface implementors. All checks are performed at runtime, while upcast will do many checks at compile-time already. downcast will perform the same checks at runtime as dynamic_cast, but will also ensure some amount of compile-time safety. Read more
source§

fn dynamic_cast_ref<T>(&self) -> Option<&T>
where T: ObjectType,

Tries to cast to reference to an object of type T. This handles upcasting, downcasting and casting between interface and interface implementors. All checks are performed at runtime, while downcast and upcast will do many checks at compile-time already. Read more
source§

unsafe fn unsafe_cast<T>(self) -> T
where T: ObjectType,

Casts to T unconditionally. Read more
source§

unsafe fn unsafe_cast_ref<T>(&self) -> &T
where T: ObjectType,

Casts to &T unconditionally. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GList> for T

source§

unsafe fn from_glib_none_num_as_vec(ptr: *const GList, num: usize) -> Vec<T>

source§

unsafe fn from_glib_container_num_as_vec(_: *const GList, _: usize) -> Vec<T>

source§

unsafe fn from_glib_full_num_as_vec(_: *const GList, _: usize) -> Vec<T>

source§

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GPtrArray> for T

source§

unsafe fn from_glib_none_num_as_vec(ptr: *const GPtrArray, num: usize) -> Vec<T>

source§

unsafe fn from_glib_container_num_as_vec( _: *const GPtrArray, _: usize ) -> Vec<T>

source§

unsafe fn from_glib_full_num_as_vec(_: *const GPtrArray, _: usize) -> Vec<T>

source§

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GSList> for T

source§

unsafe fn from_glib_none_num_as_vec(ptr: *const GSList, num: usize) -> Vec<T>

source§

unsafe fn from_glib_container_num_as_vec(_: *const GSList, _: usize) -> Vec<T>

source§

unsafe fn from_glib_full_num_as_vec(_: *const GSList, _: usize) -> Vec<T>

source§

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GList> for T

source§

unsafe fn from_glib_none_num_as_vec(ptr: *mut GList, num: usize) -> Vec<T>

source§

unsafe fn from_glib_container_num_as_vec(ptr: *mut GList, num: usize) -> Vec<T>

source§

unsafe fn from_glib_full_num_as_vec(ptr: *mut GList, num: usize) -> Vec<T>

source§

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GPtrArray> for T

source§

unsafe fn from_glib_none_num_as_vec(ptr: *mut GPtrArray, num: usize) -> Vec<T>

source§

unsafe fn from_glib_container_num_as_vec( ptr: *mut GPtrArray, num: usize ) -> Vec<T>

source§

unsafe fn from_glib_full_num_as_vec(ptr: *mut GPtrArray, num: usize) -> Vec<T>

source§

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GSList> for T

source§

unsafe fn from_glib_none_num_as_vec(ptr: *mut GSList, num: usize) -> Vec<T>

source§

unsafe fn from_glib_container_num_as_vec(ptr: *mut GSList, num: usize) -> Vec<T>

source§

unsafe fn from_glib_full_num_as_vec(ptr: *mut GSList, num: usize) -> Vec<T>

source§

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GList> for T

source§

unsafe fn from_glib_none_as_vec(ptr: *const GList) -> Vec<T>

source§

unsafe fn from_glib_container_as_vec(_: *const GList) -> Vec<T>

source§

unsafe fn from_glib_full_as_vec(_: *const GList) -> Vec<T>

source§

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GPtrArray> for T

source§

unsafe fn from_glib_none_as_vec(ptr: *const GPtrArray) -> Vec<T>

source§

unsafe fn from_glib_container_as_vec(_: *const GPtrArray) -> Vec<T>

source§

unsafe fn from_glib_full_as_vec(_: *const GPtrArray) -> Vec<T>

source§

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GSList> for T

source§

unsafe fn from_glib_none_as_vec(ptr: *const GSList) -> Vec<T>

source§

unsafe fn from_glib_container_as_vec(_: *const GSList) -> Vec<T>

source§

unsafe fn from_glib_full_as_vec(_: *const GSList) -> Vec<T>

source§

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GList> for T

source§

unsafe fn from_glib_none_as_vec(ptr: *mut GList) -> Vec<T>

source§

unsafe fn from_glib_container_as_vec(ptr: *mut GList) -> Vec<T>

source§

unsafe fn from_glib_full_as_vec(ptr: *mut GList) -> Vec<T>

source§

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GPtrArray> for T

source§

unsafe fn from_glib_none_as_vec(ptr: *mut GPtrArray) -> Vec<T>

source§

unsafe fn from_glib_container_as_vec(ptr: *mut GPtrArray) -> Vec<T>

source§

unsafe fn from_glib_full_as_vec(ptr: *mut GPtrArray) -> Vec<T>

source§

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GSList> for T

source§

unsafe fn from_glib_none_as_vec(ptr: *mut GSList) -> Vec<T>

source§

unsafe fn from_glib_container_as_vec(ptr: *mut GSList) -> Vec<T>

source§

unsafe fn from_glib_full_as_vec(ptr: *mut GSList) -> Vec<T>

source§

impl<O> GObjectExtManualGst for O
where O: IsA<Object>,

source§

fn set_property_from_str(&self, name: &str, value: &str)

source§

impl<T, U> Into<U> for T
where U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T> IntoClosureReturnValue for T
where T: Into<Value>,

source§

impl<U> IsSubclassableExt for U

source§

impl<O> MetaContainerExt for O
where O: IsA<MetaContainer>,

source§

fn add_metas_from_string(&self, str: &str) -> bool

Deserializes the given string, and adds and sets the found fields and their values on the container. The string should be the return of metas_to_string(). Read more
source§

fn check_meta_registered(&self, meta_item: &str) -> Option<(MetaFlag, Type)>

Checks whether the specified field has been registered as static, and gets the registered type and flags of the field, as used in register_meta() and register_static_meta(). Read more
source§

fn foreach<P: FnMut(&MetaContainer, &str, &Value)>(&self, func: P)

Calls the given function on each of the meta container’s set metadata fields. Read more
source§

fn boolean(&self, meta_item: &str) -> Option<bool>

Gets the current boolean value of the specified field of the meta container. If the field does not have a set value, or it is of the wrong type, the method will fail. Read more
source§

fn date(&self, meta_item: &str) -> Option<Date>

Gets the current date value of the specified field of the meta container. If the field does not have a set value, or it is of the wrong type, the method will fail. Read more
source§

fn date_time(&self, meta_item: &str) -> Option<DateTime>

Gets the current date time value of the specified field of the meta container. If the field does not have a set value, or it is of the wrong type, the method will fail. Read more
source§

fn double(&self, meta_item: &str) -> Option<f64>

Gets the current double value of the specified field of the meta container. If the field does not have a set value, or it is of the wrong type, the method will fail. Read more
source§

fn float(&self, meta_item: &str) -> Option<f32>

Gets the current float value of the specified field of the meta container. If the field does not have a set value, or it is of the wrong type, the method will fail. Read more
source§

fn int(&self, meta_item: &str) -> Option<i32>

Gets the current int value of the specified field of the meta container. If the field does not have a set value, or it is of the wrong type, the method will fail. Read more
source§

fn int64(&self, meta_item: &str) -> Option<i64>

Gets the current int64 value of the specified field of the meta container. If the field does not have a set value, or it is of the wrong type, the method will fail. Read more
source§

fn marker_list(&self, key: &str) -> Option<MarkerList>

Gets the current marker list value of the specified field of the meta container. If the field does not have a set value, or it is of the wrong type, the method will fail. Read more
source§

fn meta(&self, key: &str) -> Option<Value>

Gets the current value of the specified field of the meta container. Read more
source§

fn string(&self, meta_item: &str) -> Option<GString>

Gets the current string value of the specified field of the meta container. If the field does not have a set value, or it is of the wrong type, the method will fail. Read more
source§

fn uint(&self, meta_item: &str) -> Option<u32>

Gets the current uint value of the specified field of the meta container. If the field does not have a set value, or it is of the wrong type, the method will fail. Read more
source§

fn uint64(&self, meta_item: &str) -> Option<u64>

Gets the current uint64 value of the specified field of the meta container. If the field does not have a set value, or it is of the wrong type, the method will fail. Read more
source§

fn metas_to_string(&self) -> GString

Serializes the set metadata fields of the meta container to a string. Read more
source§

fn register_meta(&self, flags: MetaFlag, meta_item: &str, value: &Value) -> bool

Sets the value of the specified field of the meta container to the given value, and registers the field to only hold a value of the same type. After calling this, only values of the same type as value can be set for this field. The given flags can be set to make this field only readable after calling this method. Read more
source§

fn register_meta_boolean( &self, flags: MetaFlag, meta_item: &str, value: bool ) -> bool

Sets the value of the specified field of the meta container to the given boolean value, and registers the field to only hold a boolean typed value. After calling this, only boolean values can be set for this field. The given flags can be set to make this field only readable after calling this method. Read more
source§

fn register_meta_date( &self, flags: MetaFlag, meta_item: &str, value: &Date ) -> bool

Sets the value of the specified field of the meta container to the given date value, and registers the field to only hold a date typed value. After calling this, only date values can be set for this field. The given flags can be set to make this field only readable after calling this method. Read more
source§

fn register_meta_date_time( &self, flags: MetaFlag, meta_item: &str, value: &DateTime ) -> bool

Sets the value of the specified field of the meta container to the given date time value, and registers the field to only hold a date time typed value. After calling this, only date time values can be set for this field. The given flags can be set to make this field only readable after calling this method. Read more
source§

fn register_meta_double( &self, flags: MetaFlag, meta_item: &str, value: f64 ) -> bool

Sets the value of the specified field of the meta container to the given double value, and registers the field to only hold a double typed value. After calling this, only double values can be set for this field. The given flags can be set to make this field only readable after calling this method. Read more
source§

fn register_meta_float( &self, flags: MetaFlag, meta_item: &str, value: f32 ) -> bool

Sets the value of the specified field of the meta container to the given float value, and registers the field to only hold a float typed value. After calling this, only float values can be set for this field. The given flags can be set to make this field only readable after calling this method. Read more
source§

fn register_meta_int( &self, flags: MetaFlag, meta_item: &str, value: i32 ) -> bool

Sets the value of the specified field of the meta container to the given int value, and registers the field to only hold an int typed value. After calling this, only int values can be set for this field. The given flags can be set to make this field only readable after calling this method. Read more
source§

fn register_meta_int64( &self, flags: MetaFlag, meta_item: &str, value: i64 ) -> bool

Sets the value of the specified field of the meta container to the given int64 value, and registers the field to only hold an int64 typed value. After calling this, only int64 values can be set for this field. The given flags can be set to make this field only readable after calling this method. Read more
source§

fn register_meta_string( &self, flags: MetaFlag, meta_item: &str, value: &str ) -> bool

Sets the value of the specified field of the meta container to the given string value, and registers the field to only hold a string typed value. After calling this, only string values can be set for this field. The given flags can be set to make this field only readable after calling this method. Read more
source§

fn register_meta_uint( &self, flags: MetaFlag, meta_item: &str, value: u32 ) -> bool

Sets the value of the specified field of the meta container to the given uint value, and registers the field to only hold a uint typed value. After calling this, only uint values can be set for this field. The given flags can be set to make this field only readable after calling this method. Read more
source§

fn register_meta_uint64( &self, flags: MetaFlag, meta_item: &str, value: u64 ) -> bool

Sets the value of the specified field of the meta container to the given uint64 value, and registers the field to only hold a uint64 typed value. After calling this, only uint64 values can be set for this field. The given flags can be set to make this field only readable after calling this method. Read more
source§

fn register_static_meta( &self, flags: MetaFlag, meta_item: &str, type_: Type ) -> bool

Registers a static metadata field on the container to only hold the specified type. After calling this, setting a value under this field can only succeed if its type matches the registered type of the field. Read more
source§

fn set_boolean(&self, meta_item: &str, value: bool) -> bool

Sets the value of the specified field of the meta container to the given boolean value. Read more
source§

fn set_date(&self, meta_item: &str, value: &Date) -> bool

Sets the value of the specified field of the meta container to the given date value. Read more
source§

fn set_date_time(&self, meta_item: &str, value: &DateTime) -> bool

Sets the value of the specified field of the meta container to the given date time value. Read more
source§

fn set_double(&self, meta_item: &str, value: f64) -> bool

Sets the value of the specified field of the meta container to the given double value. Read more
source§

fn set_float(&self, meta_item: &str, value: f32) -> bool

Sets the value of the specified field of the meta container to the given float value. Read more
source§

fn set_int(&self, meta_item: &str, value: i32) -> bool

Sets the value of the specified field of the meta container to the given int value. Read more
source§

fn set_int64(&self, meta_item: &str, value: i64) -> bool

Sets the value of the specified field of the meta container to the given int64 value. Read more
source§

fn set_marker_list(&self, meta_item: &str, list: &MarkerList) -> bool

Sets the value of the specified field of the meta container to the given marker list value. Read more
source§

fn set_meta(&self, meta_item: &str, value: Option<&Value>) -> bool

Sets the value of the specified field of the meta container to a copy of the given value. If the given value is None, the field given by meta_item is removed and true is returned. Read more
source§

fn set_string(&self, meta_item: &str, value: &str) -> bool

Sets the value of the specified field of the meta container to the given string value. Read more
source§

fn set_uint(&self, meta_item: &str, value: u32) -> bool

Sets the value of the specified field of the meta container to the given uint value. Read more
source§

fn set_uint64(&self, meta_item: &str, value: u64) -> bool

Sets the value of the specified field of the meta container to the given uint64 value. Read more
source§

fn connect_notify_meta<F: Fn(&Self, &str, Option<&Value>) + 'static>( &self, detail: Option<&str>, f: F ) -> SignalHandlerId

This is emitted for a meta container whenever the metadata under one of its fields changes, is set for the first time, or is removed. In the latter case, value will be None. Read more
source§

impl<T> ObjectExt for T
where T: ObjectType,

source§

fn is<U>(&self) -> bool
where U: StaticType,

Returns true if the object is an instance of (can be cast to) T.
source§

fn type_(&self) -> Type

Returns the type of the object.
source§

fn object_class(&self) -> &Class<Object>

Returns the ObjectClass of the object. Read more
source§

fn class(&self) -> &Class<T>
where T: IsClass,

Returns the class of the object.
source§

fn class_of<U>(&self) -> Option<&Class<U>>
where U: IsClass,

Returns the class of the object in the given type T. Read more
source§

fn interface<U>(&self) -> Option<InterfaceRef<'_, U>>
where U: IsInterface,

Returns the interface T of the object. Read more
source§

fn set_property(&self, property_name: &str, value: impl Into<Value>)

Sets the property property_name of the object to value value. Read more
source§

fn set_property_from_value(&self, property_name: &str, value: &Value)

Sets the property property_name of the object to value value. Read more
source§

fn set_properties(&self, property_values: &[(&str, &dyn ToValue)])

Sets multiple properties of the object at once. Read more
source§

fn set_properties_from_value(&self, property_values: &[(&str, Value)])

Sets multiple properties of the object at once. Read more
source§

fn property<V>(&self, property_name: &str) -> V
where V: for<'b> FromValue<'b> + 'static,

Gets the property property_name of the object and cast it to the type V. Read more
source§

fn property_value(&self, property_name: &str) -> Value

Gets the property property_name of the object. Read more
source§

fn has_property(&self, property_name: &str, type_: Option<Type>) -> bool

Check if the object has a property property_name of the given type_. Read more
source§

fn property_type(&self, property_name: &str) -> Option<Type>

Get the type of the property property_name of this object. Read more
source§

fn find_property(&self, property_name: &str) -> Option<ParamSpec>

Get the ParamSpec of the property property_name of this object.
source§

fn list_properties(&self) -> PtrSlice<ParamSpec>

Return all ParamSpec of the properties of this object.
source§

fn freeze_notify(&self) -> PropertyNotificationFreezeGuard

Freeze all property notifications until the return guard object is dropped. Read more
source§

unsafe fn set_qdata<QD>(&self, key: Quark, value: QD)
where QD: 'static,

Set arbitrary data on this object with the given key. Read more
source§

unsafe fn qdata<QD>(&self, key: Quark) -> Option<NonNull<QD>>
where QD: 'static,

Return previously set arbitrary data of this object with the given key. Read more
source§

unsafe fn steal_qdata<QD>(&self, key: Quark) -> Option<QD>
where QD: 'static,

Retrieve previously set arbitrary data of this object with the given key. Read more
source§

unsafe fn set_data<QD>(&self, key: &str, value: QD)
where QD: 'static,

Set arbitrary data on this object with the given key. Read more
source§

unsafe fn data<QD>(&self, key: &str) -> Option<NonNull<QD>>
where QD: 'static,

Return previously set arbitrary data of this object with the given key. Read more
source§

unsafe fn steal_data<QD>(&self, key: &str) -> Option<QD>
where QD: 'static,

Retrieve previously set arbitrary data of this object with the given key. Read more
source§

fn block_signal(&self, handler_id: &SignalHandlerId)

Block a given signal handler. Read more
source§

fn unblock_signal(&self, handler_id: &SignalHandlerId)

Unblock a given signal handler.
source§

fn stop_signal_emission(&self, signal_id: SignalId, detail: Option<Quark>)

Stop emission of the currently emitted signal.
source§

fn stop_signal_emission_by_name(&self, signal_name: &str)

Stop emission of the currently emitted signal by the (possibly detailed) signal name.
source§

fn connect<F>( &self, signal_name: &str, after: bool, callback: F ) -> SignalHandlerId
where F: Fn(&[Value]) -> Option<Value> + Send + Sync + 'static,

Connect to the signal signal_name on this object. Read more
source§

fn connect_id<F>( &self, signal_id: SignalId, details: Option<Quark>, after: bool, callback: F ) -> SignalHandlerId
where F: Fn(&[Value]) -> Option<Value> + Send + Sync + 'static,

Connect to the signal signal_id on this object. Read more
source§

fn connect_local<F>( &self, signal_name: &str, after: bool, callback: F ) -> SignalHandlerId
where F: Fn(&[Value]) -> Option<Value> + 'static,

Connect to the signal signal_name on this object. Read more
source§

fn connect_local_id<F>( &self, signal_id: SignalId, details: Option<Quark>, after: bool, callback: F ) -> SignalHandlerId
where F: Fn(&[Value]) -> Option<Value> + 'static,

Connect to the signal signal_id on this object. Read more
source§

unsafe fn connect_unsafe<F>( &self, signal_name: &str, after: bool, callback: F ) -> SignalHandlerId
where F: Fn(&[Value]) -> Option<Value>,

Connect to the signal signal_name on this object. Read more
source§

unsafe fn connect_unsafe_id<F>( &self, signal_id: SignalId, details: Option<Quark>, after: bool, callback: F ) -> SignalHandlerId
where F: Fn(&[Value]) -> Option<Value>,

Connect to the signal signal_id on this object. Read more
source§

fn connect_closure( &self, signal_name: &str, after: bool, closure: RustClosure ) -> SignalHandlerId

Connect a closure to the signal signal_name on this object. Read more
source§

fn connect_closure_id( &self, signal_id: SignalId, details: Option<Quark>, after: bool, closure: RustClosure ) -> SignalHandlerId

Connect a closure to the signal signal_id on this object. Read more
source§

fn watch_closure(&self, closure: &impl AsRef<Closure>)

Limits the lifetime of closure to the lifetime of the object. When the object’s reference count drops to zero, the closure will be invalidated. An invalidated closure will ignore any calls to invoke_with_values, or invoke when using Rust closures.
source§

fn emit<R>(&self, signal_id: SignalId, args: &[&dyn ToValue]) -> R

Emit signal by signal id. Read more
source§

fn emit_with_values(&self, signal_id: SignalId, args: &[Value]) -> Option<Value>

Same as Self::emit but takes Value for the arguments.
source§

fn emit_by_name<R>(&self, signal_name: &str, args: &[&dyn ToValue]) -> R

Emit signal by its name. Read more
source§

fn emit_by_name_with_values( &self, signal_name: &str, args: &[Value] ) -> Option<Value>

Emit signal by its name. Read more
source§

fn emit_by_name_with_details<R>( &self, signal_name: &str, details: Quark, args: &[&dyn ToValue] ) -> R

Emit signal by its name with details. Read more
source§

fn emit_by_name_with_details_and_values( &self, signal_name: &str, details: Quark, args: &[Value] ) -> Option<Value>

Emit signal by its name with details. Read more
source§

fn emit_with_details<R>( &self, signal_id: SignalId, details: Quark, args: &[&dyn ToValue] ) -> R

Emit signal by signal id with details. Read more
source§

fn emit_with_details_and_values( &self, signal_id: SignalId, details: Quark, args: &[Value] ) -> Option<Value>

Emit signal by signal id with details. Read more
source§

fn disconnect(&self, handler_id: SignalHandlerId)

Disconnect a previously connected signal handler.
source§

fn connect_notify<F>(&self, name: Option<&str>, f: F) -> SignalHandlerId
where F: Fn(&T, &ParamSpec) + Send + Sync + 'static,

Connect to the notify signal of the object. Read more
source§

fn connect_notify_local<F>(&self, name: Option<&str>, f: F) -> SignalHandlerId
where F: Fn(&T, &ParamSpec) + 'static,

Connect to the notify signal of the object. Read more
source§

unsafe fn connect_notify_unsafe<F>( &self, name: Option<&str>, f: F ) -> SignalHandlerId
where F: Fn(&T, &ParamSpec),

Connect to the notify signal of the object. Read more
source§

fn notify(&self, property_name: &str)

Notify that the given property has changed its value. Read more
source§

fn notify_by_pspec(&self, pspec: &ParamSpec)

Notify that the given property has changed its value. Read more
source§

fn downgrade(&self) -> WeakRef<T>

Downgrade this object to a weak reference.
source§

fn add_weak_ref_notify<F>(&self, f: F) -> WeakRefNotify<T>
where F: FnOnce() + Send + 'static,

Add a callback to be notified when the Object is disposed.
source§

fn add_weak_ref_notify_local<F>(&self, f: F) -> WeakRefNotify<T>
where F: FnOnce() + 'static,

Add a callback to be notified when the Object is disposed. Read more
source§

fn bind_property<'a, 'f, 't, O>( &'a self, source_property: &'a str, target: &'a O, target_property: &'a str ) -> BindingBuilder<'a, 'f, 't>
where O: ObjectType,

Bind property source_property on this object to the target_property on the target object. Read more
source§

fn ref_count(&self) -> u32

Returns the strong reference count of this object.
source§

unsafe fn run_dispose(&self)

Runs the dispose mechanism of the object. Read more
source§

impl<T> Property for T
where T: HasParamSpec,

§

type Value = T

source§

impl<T> PropertyGet for T
where T: HasParamSpec,

§

type Value = T

source§

fn get<R, F>(&self, f: F) -> R
where F: Fn(&<T as PropertyGet>::Value) -> R,

source§

impl<T> StaticTypeExt for T
where T: StaticType,

source§

fn ensure_type()

Ensures that the type has been registered with the type system.
source§

impl<T> ToOwned for T
where T: Clone,

§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
source§

impl<T> ToSendValue for T
where T: Send + ToValue + ?Sized,

source§

fn to_send_value(&self) -> SendValue

Returns a SendValue clone of self.
source§

impl<O> TrackElementAssetExt for O

source§

fn natural_framerate(&self) -> Option<(i32, i32)>

Result: true if self has a natural framerate false otherwise Read more
source§

fn track_type(&self) -> TrackType

Get the GESAssetTrackType the TrackElement extracted from self_ should get into Read more
source§

fn set_track_type(&self, type_: TrackType)

Set the TrackType the TrackElement extracted from self_ should get into Read more
source§

fn connect_track_type_notify<F: Fn(&Self) + Send + Sync + 'static>( &self, f: F ) -> SignalHandlerId

source§

impl<T> TransparentType for T

source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T> TryFromClosureReturnValue for T
where T: for<'a> FromValue<'a> + StaticType + 'static,

source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
source§

impl<'a, T, C, E> FromValueOptional<'a> for T
where T: FromValue<'a, Checker = C>, C: ValueTypeChecker<Error = ValueTypeMismatchOrNoneError<E>>, E: Error + Send + 'static,

source§

impl<Super, Sub> MayDowncastTo<Sub> for Super
where Super: IsA<Super>, Sub: IsA<Super>,