pub struct RTPBasePayload { /* private fields */ }
Expand description

Provides a base class for RTP payloaders

This is an Abstract Base Class, you cannot instantiate it.

§Properties

§auto-header-extension

If enabled, the payloader will automatically try to enable all the RTP header extensions provided in the src caps, saving the application the need to handle these extensions manually using the GstRTPBasePayload::request-extension: signal.

Readable | Writeable

§extensions

A list of already enabled RTP header extensions. This may be useful for finding out which extensions are already enabled (with add-extension signal) and picking a non-conflicting ID for a new extension that needs to be added on top of the existing ones.

Note that the value returned by reading this property is not dynamically updated when the set of enabled extensions changes by any of existing action signals. Rather, it represents the current state at the time the property is read.

Dynamic updates of this property can be received by subscribing to its corresponding “notify” signal, i.e. “notify::extensions”.

Readable

§max-ptime

Readable | Writeable

§min-ptime

Minimum duration of the packet data in ns (can’t go above MTU)

Readable | Writeable

§mtu

Readable | Writeable

§onvif-no-rate-control

Make the payloader timestamp packets according to the Rate-Control=no behaviour specified in the ONVIF replay spec.

Readable | Writeable

§perfect-rtptime

Try to use the offset fields to generate perfect RTP timestamps. When this option is disabled, RTP timestamps are generated from GST_BUFFER_PTS of each payloaded buffer. The PTSes of buffers may not necessarily increment with the amount of data in each input buffer, consider e.g. the case where the buffer arrives from a network which means that the PTS is unrelated to the amount of data. Because the RTP timestamps are generated from GST_BUFFER_PTS this can result in RTP timestamps that also don’t increment with the amount of data in the payloaded packet. To circumvent this it is possible to set the perfect rtptime option enabled. When this option is enabled the payloader will increment the RTP timestamps based on GST_BUFFER_OFFSET which relates to the amount of data in each packet rather than the GST_BUFFER_PTS of each buffer and therefore the RTP timestamps will more closely correlate with the amount of data in each buffer. Currently GstRTPBasePayload is limited to handling perfect RTP timestamps for audio streams.

Readable | Writeable

§pt

Readable | Writeable

§ptime-multiple

Force buffers to be multiples of this duration in ns (0 disables)

Readable | Writeable

§scale-rtptime

Make the RTP packets’ timestamps be scaled with the segment’s rate (corresponding to RTSP speed parameter). Disabling this property means the timestamps will not be affected by the set delivery speed (RTSP speed).

Example: A server wants to allow streaming a recorded video in double speed but still have the timestamps correspond to the position in the video. This is achieved by the client setting RTSP Speed to 2 while the server has this property disabled.

Readable | Writeable

§seqnum

Readable

§seqnum-offset

Readable | Writeable

§source-info

Enable writing the CSRC field in allocated RTP header based on RTP source information found in the input buffer’s GstRTPSourceMeta.

Readable | Writeable

§ssrc

Readable | Writeable

§stats

Various payloader statistics retrieved atomically (and are therefore synchroized with each other), these can be used e.g. to generate an RTP-Info header. This property return a GstStructure named application/x-rtp-payload-stats containing the following fields relating to the last processed buffer and current state of the stream being payloaded:

  • clock-rate :G_TYPE_UINT, clock-rate of the stream
  • running-time :G_TYPE_UINT64, running time
  • seqnum :G_TYPE_UINT, sequence number, same as seqnum
  • timestamp :G_TYPE_UINT, RTP timestamp, same as timestamp
  • ssrc :G_TYPE_UINT, The SSRC in use
  • pt :G_TYPE_UINT, The Payload type in use, same as pt
  • seqnum-offset :G_TYPE_UINT, The current offset added to the seqnum
  • timestamp-offset :G_TYPE_UINT, The current offset added to the timestamp

Readable

§timestamp

Readable

§timestamp-offset

Readable | Writeable

Object

§name

Readable | Writeable | Construct

§parent

The parent of the object. Please note, that when changing the ‘parent’ property, we don’t emit GObject::notify and deep-notify signals due to locking issues. In some cases one can use GstBin::element-added or GstBin::element-removed signals on the parent to achieve a similar effect.

Readable | Writeable

§Signals

§add-extension

Add ext as an extension for writing part of an RTP header extension onto outgoing RTP packets.

Action

§clear-extensions

Clear all RTP header extensions used by this payloader.

Action

§request-extension

The returned ext must be configured with the correct ext_id and with the necessary attributes as required by the extension implementation.

Element

§no-more-pads

This signals that the element will not generate more dynamic pads. Note that this signal will usually be emitted from the context of the streaming thread.

§pad-added

a new GstPad has been added to the element. Note that this signal will usually be emitted from the context of the streaming thread. Also keep in mind that if you add new elements to the pipeline in the signal handler you will need to set them to the desired target state with [ElementExtManual::set_state()][crate::gst::prelude::ElementExtManual::set_state()] or [ElementExtManual::sync_state_with_parent()][crate::gst::prelude::ElementExtManual::sync_state_with_parent()].

§pad-removed

a GstPad has been removed from the element

Object

§deep-notify

The deep notify signal is used to be notified of property changes. It is typically attached to the toplevel bin to receive notifications from all the elements contained in that bin.

Detailed

§Implements

RTPBasePayloadExt, gst::prelude::ElementExt, gst::prelude::ObjectExt, RTPBasePayloadExtManual

Implementations§

source§

impl RTPBasePayload

source

pub const NONE: Option<&'static RTPBasePayload> = None

Trait Implementations§

source§

impl Clone for RTPBasePayload

source§

fn clone(&self) -> Self

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
source§

impl Debug for RTPBasePayload

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
source§

impl HasParamSpec for RTPBasePayload

§

type ParamSpec = ParamSpecObject

§

type SetValue = RTPBasePayload

Preferred value to be used as setter for the associated ParamSpec.
§

type BuilderFn = fn(_: &str) -> ParamSpecObjectBuilder<'_, RTPBasePayload>

source§

fn param_spec_builder() -> Self::BuilderFn

source§

impl Hash for RTPBasePayload

source§

fn hash<H>(&self, state: &mut H)
where H: Hasher,

Feeds this value into the given Hasher. Read more
1.3.0 · source§

fn hash_slice<H>(data: &[Self], state: &mut H)
where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher. Read more
source§

impl<T: RTPBasePayloadImpl> IsSubclassable<T> for RTPBasePayload

source§

fn class_init(klass: &mut Class<Self>)

Override the virtual methods of this class for the given subclass and do other class initialization. Read more
source§

fn instance_init(instance: &mut InitializingObject<T>)

Instance specific initialization. Read more
source§

impl Ord for RTPBasePayload

source§

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other. Read more
1.21.0 · source§

fn max(self, other: Self) -> Self
where Self: Sized,

Compares and returns the maximum of two values. Read more
1.21.0 · source§

fn min(self, other: Self) -> Self
where Self: Sized,

Compares and returns the minimum of two values. Read more
1.50.0 · source§

fn clamp(self, min: Self, max: Self) -> Self
where Self: Sized + PartialOrd,

Restrict a value to a certain interval. Read more
source§

impl ParentClassIs for RTPBasePayload

source§

impl<OT: ObjectType> PartialEq<OT> for RTPBasePayload

source§

fn eq(&self, other: &OT) -> bool

This method tests for self and other values to be equal, and is used by ==.
1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
source§

impl<OT: ObjectType> PartialOrd<OT> for RTPBasePayload

source§

fn partial_cmp(&self, other: &OT) -> Option<Ordering>

This method returns an ordering between self and other values if one exists. Read more
1.0.0 · source§

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator. Read more
1.0.0 · source§

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more
1.0.0 · source§

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator. Read more
1.0.0 · source§

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more
source§

impl StaticType for RTPBasePayload

source§

fn static_type() -> Type

Returns the type identifier of Self.
source§

impl Eq for RTPBasePayload

source§

impl IsA<Element> for RTPBasePayload

source§

impl IsA<Object> for RTPBasePayload

source§

impl Send for RTPBasePayload

source§

impl Sync for RTPBasePayload

Auto Trait Implementations§

Blanket Implementations§

source§

impl<T> Any for T
where T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for T
where T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> Cast for T
where T: ObjectType,

source§

fn upcast<T>(self) -> T
where T: ObjectType, Self: IsA<T>,

Upcasts an object to a superclass or interface T. Read more
source§

fn upcast_ref<T>(&self) -> &T
where T: ObjectType, Self: IsA<T>,

Upcasts an object to a reference of its superclass or interface T. Read more
source§

fn downcast<T>(self) -> Result<T, Self>
where T: ObjectType, Self: MayDowncastTo<T>,

Tries to downcast to a subclass or interface implementor T. Read more
source§

fn downcast_ref<T>(&self) -> Option<&T>
where T: ObjectType, Self: MayDowncastTo<T>,

Tries to downcast to a reference of its subclass or interface implementor T. Read more
source§

fn dynamic_cast<T>(self) -> Result<T, Self>
where T: ObjectType,

Tries to cast to an object of type T. This handles upcasting, downcasting and casting between interface and interface implementors. All checks are performed at runtime, while upcast will do many checks at compile-time already. downcast will perform the same checks at runtime as dynamic_cast, but will also ensure some amount of compile-time safety. Read more
source§

fn dynamic_cast_ref<T>(&self) -> Option<&T>
where T: ObjectType,

Tries to cast to reference to an object of type T. This handles upcasting, downcasting and casting between interface and interface implementors. All checks are performed at runtime, while downcast and upcast will do many checks at compile-time already. Read more
source§

unsafe fn unsafe_cast<T>(self) -> T
where T: ObjectType,

Casts to T unconditionally. Read more
source§

unsafe fn unsafe_cast_ref<T>(&self) -> &T
where T: ObjectType,

Casts to &T unconditionally. Read more
source§

impl<O> ElementExt for O
where O: IsA<Element>,

source§

fn abort_state(&self)

Abort the state change of the element. This function is used by elements that do asynchronous state changes and find out something is wrong. Read more
source§

fn add_pad(&self, pad: &impl IsA<Pad>) -> Result<(), BoolError>

Adds a pad (link point) to self. pad’s parent will be set to self; see GstObjectExt::set_parent() for refcounting information. Read more
source§

fn change_state( &self, transition: StateChange ) -> Result<StateChangeSuccess, StateChangeError>

Perform transition on self. Read more
source§

fn continue_state( &self, ret: impl Into<StateChangeReturn> ) -> Result<StateChangeSuccess, StateChangeError>

Commit the state change of the element and proceed to the next pending state if any. This function is used by elements that do asynchronous state changes. The core will normally call this method automatically when an element returned StateChangeReturn::Success from the state change function. Read more
source§

fn create_all_pads(&self)

Creates a pad for each pad template that is always available. This function is only useful during object initialization of subclasses of Element.
source§

fn decorate_stream_id(&self, stream_id: &str) -> GString

Creates a stream-id for self by combining the upstream information with the stream_id. Read more
source§

fn foreach_pad<P>(&self, func: P) -> bool
where P: FnMut(&Element, &Pad) -> bool,

Call func with user_data for each of self’s pads. func will be called exactly once for each pad that exists at the time of this call, unless one of the calls to func returns false in which case we will stop iterating pads and return early. If new pads are added or pads are removed while pads are being iterated, this will not be taken into account until next time this function is used. Read more
source§

fn foreach_sink_pad<P>(&self, func: P) -> bool
where P: FnMut(&Element, &Pad) -> bool,

Call func with user_data for each of self’s sink pads. func will be called exactly once for each sink pad that exists at the time of this call, unless one of the calls to func returns false in which case we will stop iterating pads and return early. If new sink pads are added or sink pads are removed while the sink pads are being iterated, this will not be taken into account until next time this function is used. Read more
source§

fn foreach_src_pad<P>(&self, func: P) -> bool
where P: FnMut(&Element, &Pad) -> bool,

Call func with user_data for each of self’s source pads. func will be called exactly once for each source pad that exists at the time of this call, unless one of the calls to func returns false in which case we will stop iterating pads and return early. If new source pads are added or source pads are removed while the source pads are being iterated, this will not be taken into account until next time this function is used. Read more
source§

fn base_time(&self) -> Option<ClockTime>

Returns the base time of the element. The base time is the absolute time of the clock when this element was last put to PLAYING. Subtracting the base time from the clock time gives the running time of the element. Read more
source§

fn bus(&self) -> Option<Bus>

Returns the bus of the element. Note that only a Pipeline will provide a bus for the application. Read more
source§

fn clock(&self) -> Option<Clock>

Gets the currently configured clock of the element. This is the clock as was last set with set_clock(). Read more
source§

fn compatible_pad( &self, pad: &impl IsA<Pad>, caps: Option<&Caps> ) -> Option<Pad>

Looks for an unlinked pad to which the given pad can link. It is not guaranteed that linking the pads will work, though it should work in most cases. Read more
source§

fn compatible_pad_template( &self, compattempl: &PadTemplate ) -> Option<PadTemplate>

Retrieves a pad template from self that is compatible with compattempl. Pads from compatible templates can be linked together. Read more
source§

fn context(&self, context_type: &str) -> Option<Context>

Gets the context with context_type set on the element or NULL. Read more
source§

fn contexts(&self) -> Vec<Context>

Gets the contexts set on the element. Read more
source§

fn factory(&self) -> Option<ElementFactory>

Retrieves the factory that was used to create this element. Read more
source§

fn start_time(&self) -> Option<ClockTime>

Returns the start time of the element. The start time is the running time of the clock when this element was last put to PAUSED. Read more
source§

fn state( &self, timeout: impl Into<Option<ClockTime>> ) -> (Result<StateChangeSuccess, StateChangeError>, State, State)

Gets the state of the element. Read more
source§

fn static_pad(&self, name: &str) -> Option<Pad>

Retrieves a pad from self by name. This version only retrieves already-existing (i.e. ‘static’) pads. Read more
source§

fn is_locked_state(&self) -> bool

Checks if the state of an element is locked. If the state of an element is locked, state changes of the parent don’t affect the element. This way you can leave currently unused elements inside bins. Just lock their state before changing the state from State::Null. Read more
source§

fn lost_state(&self)

Brings the element to the lost state. The current state of the element is copied to the pending state so that any call to state() will return StateChangeReturn::Async. Read more
source§

fn no_more_pads(&self)

Use this function to signal that the element does not expect any more pads to show up in the current pipeline. This function should be called whenever pads have been added by the element itself. Elements with PadPresence::Sometimes pad templates use this in combination with autopluggers to figure out that the element is done initializing its pads. Read more
source§

fn post_message(&self, message: Message) -> Result<(), BoolError>

Post a message on the element’s Bus. This function takes ownership of the message; if you want to access the message after this call, you should add an additional reference before calling. Read more
source§

fn provide_clock(&self) -> Option<Clock>

Get the clock provided by the given element. Read more
source§

fn release_request_pad(&self, pad: &impl IsA<Pad>)

Makes the element free the previously requested pad as obtained with request_pad(). Read more
source§

fn remove_pad(&self, pad: &impl IsA<Pad>) -> Result<(), BoolError>

Removes pad from self. pad will be destroyed if it has not been referenced elsewhere using GstObjectExt::unparent(). Read more
source§

fn request_pad( &self, templ: &PadTemplate, name: Option<&str>, caps: Option<&Caps> ) -> Option<Pad>

Retrieves a request pad from the element according to the provided template. Pad templates can be looked up using ElementFactory::static_pad_templates(). Read more
source§

fn set_base_time(&self, time: ClockTime)

Set the base time of an element. See base_time(). Read more
source§

fn set_bus(&self, bus: Option<&Bus>)

Sets the bus of the element. Increases the refcount on the bus. For internal use only, unless you’re testing elements. Read more
source§

fn set_clock(&self, clock: Option<&impl IsA<Clock>>) -> Result<(), BoolError>

Sets the clock for the element. This function increases the refcount on the clock. Any previously set clock on the object is unreffed. Read more
source§

fn set_context(&self, context: &Context)

Sets the context of the element. Increases the refcount of the context. Read more
source§

fn set_locked_state(&self, locked_state: bool) -> bool

Locks the state of an element, so state changes of the parent don’t affect this element anymore. Read more
source§

fn set_start_time(&self, time: impl Into<Option<ClockTime>>)

Set the start time of an element. The start time of the element is the running time of the element when it last went to the PAUSED state. In READY or after a flushing seek, it is set to 0. Read more
source§

fn set_state( &self, state: State ) -> Result<StateChangeSuccess, StateChangeError>

Sets the state of the element. This function will try to set the requested state by going through all the intermediary states and calling the class’s state change function for each. Read more
source§

fn sync_state_with_parent(&self) -> Result<(), BoolError>

Tries to change the state of the element to the same as its parent. If this function returns false, the state of element is undefined. Read more
Unlinks all source pads of the source element with all sink pads of the sink element to which they are linked. Read more
Unlinks the two named pads of the source and destination elements. Read more
source§

fn connect_no_more_pads<F>(&self, f: F) -> SignalHandlerId
where F: Fn(&Self) + Send + Sync + 'static,

This signals that the element will not generate more dynamic pads. Note that this signal will usually be emitted from the context of the streaming thread.
source§

fn connect_pad_added<F>(&self, f: F) -> SignalHandlerId
where F: Fn(&Self, &Pad) + Send + Sync + 'static,

a new Pad has been added to the element. Note that this signal will usually be emitted from the context of the streaming thread. Also keep in mind that if you add new elements to the pipeline in the signal handler you will need to set them to the desired target state with set_state() or sync_state_with_parent(). Read more
source§

fn connect_pad_removed<F>(&self, f: F) -> SignalHandlerId
where F: Fn(&Self, &Pad) + Send + Sync + 'static,

a Pad has been removed from the element Read more
source§

impl<O> ElementExtManual for O
where O: IsA<Element>,

source§

fn element_class(&self) -> &Class<Element>

source§

fn current_state(&self) -> State

source§

fn pending_state(&self) -> State

source§

fn query(&self, query: &mut QueryRef) -> bool

Performs a query on the given element. Read more
source§

fn send_event(&self, event: impl Into<Event>) -> bool

Sends an event to an element. If the element doesn’t implement an event handler, the event will be pushed on a random linked sink pad for downstream events or a random linked source pad for upstream events. Read more
source§

fn metadata<'a>(&self, key: &str) -> Option<&'a str>

Get metadata with key in klass. Read more
source§

fn pad_template(&self, name: &str) -> Option<PadTemplate>

Retrieves a padtemplate from self with the given name. Read more
source§

fn pad_template_list(&self) -> List<PadTemplate>

Retrieves a list of the pad templates associated with self. The list must not be modified by the calling code. Read more
source§

fn message_full<T>( &self, type_: ElementMessageType, code: T, message: Option<&str>, debug: Option<&str>, file: &str, function: &str, line: u32 )

Post an error, warning or info message on the bus from inside an element. Read more
source§

fn set_element_flags(&self, flags: ElementFlags)

source§

fn unset_element_flags(&self, flags: ElementFlags)

source§

fn element_flags(&self) -> ElementFlags

source§

fn message_full_with_details<T>( &self, type_: ElementMessageType, code: T, message: Option<&str>, debug: Option<&str>, file: &str, function: &str, line: u32, structure: Structure )

Post an error, warning or info message on the bus from inside an element. Read more
source§

fn post_error_message(&self, msg: ErrorMessage)

source§

fn iterate_pads(&self) -> Iterator<Pad>

Retrieves an iterator of self’s pads. The iterator should be freed after usage. Also more specialized iterators exists such as iterate_src_pads() or iterate_sink_pads(). Read more
source§

fn iterate_sink_pads(&self) -> Iterator<Pad>

Retrieves an iterator of self’s sink pads. Read more
source§

fn iterate_src_pads(&self) -> Iterator<Pad>

Retrieves an iterator of self’s source pads. Read more
source§

fn pads(&self) -> Vec<Pad>

source§

fn sink_pads(&self) -> Vec<Pad>

source§

fn src_pads(&self) -> Vec<Pad>

source§

fn num_pads(&self) -> u16

source§

fn num_sink_pads(&self) -> u16

source§

fn num_src_pads(&self) -> u16

source§

fn add_property_deep_notify_watch( &self, property_name: Option<&str>, include_value: bool ) -> NotifyWatchId

property_name Read more
source§

fn add_property_notify_watch( &self, property_name: Option<&str>, include_value: bool ) -> NotifyWatchId

property_name Read more
source§

fn remove_property_notify_watch(&self, watch_id: NotifyWatchId)

watch_id Read more
source§

fn query_convert<U>(&self, src_val: impl FormattedValue) -> Option<U>

Queries an element to convert src_val in src_format to dest_format. Read more
source§

fn query_convert_generic( &self, src_val: impl FormattedValue, dest_format: Format ) -> Option<GenericFormattedValue>

source§

fn query_duration<T>(&self) -> Option<T>

Queries an element (usually top-level pipeline or playbin element) for the total stream duration in nanoseconds. This query will only work once the pipeline is prerolled (i.e. reached PAUSED or PLAYING state). The application will receive an ASYNC_DONE message on the pipeline bus when that is the case. Read more
source§

fn query_duration_generic( &self, format: Format ) -> Option<GenericFormattedValue>

source§

fn query_position<T>(&self) -> Option<T>

Queries an element (usually top-level pipeline or playbin element) for the stream position in nanoseconds. This will be a value between 0 and the stream duration (if the stream duration is known). This query will usually only work once the pipeline is prerolled (i.e. reached PAUSED or PLAYING state). The application will receive an ASYNC_DONE message on the pipeline bus when that is the case. Read more
source§

fn query_position_generic( &self, format: Format ) -> Option<GenericFormattedValue>

source§

fn seek<V>( &self, rate: f64, flags: SeekFlags, start_type: SeekType, start: V, stop_type: SeekType, stop: impl CompatibleFormattedValue<V> ) -> Result<(), BoolError>
where V: FormattedValue,

Sends a seek event to an element. See gst_event_new_seek() for the details of the parameters. The seek event is sent to the element using send_event(). Read more
source§

fn seek_simple( &self, seek_flags: SeekFlags, seek_pos: impl FormattedValue ) -> Result<(), BoolError>

Simple API to perform a seek on the given element, meaning it just seeks to the given position relative to the start of the stream. For more complex operations like segment seeks (e.g. for looping) or changing the playback rate or seeking relative to the last configured playback segment you should use seek(). Read more
source§

fn call_async<F>(&self, func: F)
where F: FnOnce(&Self) + Send + 'static,

Calls func from another thread and passes user_data to it. This is to be used for cases when a state change has to be performed from a streaming thread, directly via ElementExt::set_state() or indirectly e.g. via SEEK events. Read more
source§

fn call_async_future<F, T>( &self, func: F ) -> Pin<Box<dyn Future<Output = T> + Send>>
where F: FnOnce(&Self) -> T + Send + 'static, T: Send + 'static,

source§

fn current_running_time(&self) -> Option<ClockTime>

Returns the running time of the element. The running time is the element’s clock time minus its base time. Will return GST_CLOCK_TIME_NONE if the element has no clock, or if its base time has not been set. Read more
source§

fn current_clock_time(&self) -> Option<ClockTime>

Returns the current clock time of the element, as in, the time of the element’s clock, or GST_CLOCK_TIME_NONE if there is no clock. Read more
source§

fn request_pad_simple(&self, name: &str) -> Option<Pad>

The name of this function is confusing to people learning GStreamer. request_pad_simple() aims at making it more explicit it is a simplified ElementExt::request_pad(). Read more
Links self to dest. The link must be from source to destination; the other direction will not be tried. The function looks for existing pads that aren’t linked yet. It will request new pads if necessary. Such pads need to be released manually when unlinking. If multiple links are possible, only one is established. Read more
Links self to dest using the given caps as filtercaps. The link must be from source to destination; the other direction will not be tried. The function looks for existing pads that aren’t linked yet. It will request new pads if necessary. If multiple links are possible, only one is established. Read more
Links the two named pads of the source and destination elements. Side effect is that if one of the pads has no parent, it becomes a child of the parent of the other element. If they have different parents, the link fails. Read more
Links the two named pads of the source and destination elements. Side effect is that if one of the pads has no parent, it becomes a child of the parent of the other element. If they have different parents, the link fails. If caps is not None, makes sure that the caps of the link is a subset of caps. Read more
Links the two named pads of the source and destination elements. Side effect is that if one of the pads has no parent, it becomes a child of the parent of the other element. If they have different parents, the link fails. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GList> for T

source§

unsafe fn from_glib_none_num_as_vec(ptr: *const GList, num: usize) -> Vec<T>

source§

unsafe fn from_glib_container_num_as_vec(_: *const GList, _: usize) -> Vec<T>

source§

unsafe fn from_glib_full_num_as_vec(_: *const GList, _: usize) -> Vec<T>

source§

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GPtrArray> for T

source§

unsafe fn from_glib_none_num_as_vec(ptr: *const GPtrArray, num: usize) -> Vec<T>

source§

unsafe fn from_glib_container_num_as_vec( _: *const GPtrArray, _: usize ) -> Vec<T>

source§

unsafe fn from_glib_full_num_as_vec(_: *const GPtrArray, _: usize) -> Vec<T>

source§

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GSList> for T

source§

unsafe fn from_glib_none_num_as_vec(ptr: *const GSList, num: usize) -> Vec<T>

source§

unsafe fn from_glib_container_num_as_vec(_: *const GSList, _: usize) -> Vec<T>

source§

unsafe fn from_glib_full_num_as_vec(_: *const GSList, _: usize) -> Vec<T>

source§

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GList> for T

source§

unsafe fn from_glib_none_num_as_vec(ptr: *mut GList, num: usize) -> Vec<T>

source§

unsafe fn from_glib_container_num_as_vec(ptr: *mut GList, num: usize) -> Vec<T>

source§

unsafe fn from_glib_full_num_as_vec(ptr: *mut GList, num: usize) -> Vec<T>

source§

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GPtrArray> for T

source§

unsafe fn from_glib_none_num_as_vec(ptr: *mut GPtrArray, num: usize) -> Vec<T>

source§

unsafe fn from_glib_container_num_as_vec( ptr: *mut GPtrArray, num: usize ) -> Vec<T>

source§

unsafe fn from_glib_full_num_as_vec(ptr: *mut GPtrArray, num: usize) -> Vec<T>

source§

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GSList> for T

source§

unsafe fn from_glib_none_num_as_vec(ptr: *mut GSList, num: usize) -> Vec<T>

source§

unsafe fn from_glib_container_num_as_vec(ptr: *mut GSList, num: usize) -> Vec<T>

source§

unsafe fn from_glib_full_num_as_vec(ptr: *mut GSList, num: usize) -> Vec<T>

source§

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GList> for T

source§

unsafe fn from_glib_none_as_vec(ptr: *const GList) -> Vec<T>

source§

unsafe fn from_glib_container_as_vec(_: *const GList) -> Vec<T>

source§

unsafe fn from_glib_full_as_vec(_: *const GList) -> Vec<T>

source§

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GPtrArray> for T

source§

unsafe fn from_glib_none_as_vec(ptr: *const GPtrArray) -> Vec<T>

source§

unsafe fn from_glib_container_as_vec(_: *const GPtrArray) -> Vec<T>

source§

unsafe fn from_glib_full_as_vec(_: *const GPtrArray) -> Vec<T>

source§

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GSList> for T

source§

unsafe fn from_glib_none_as_vec(ptr: *const GSList) -> Vec<T>

source§

unsafe fn from_glib_container_as_vec(_: *const GSList) -> Vec<T>

source§

unsafe fn from_glib_full_as_vec(_: *const GSList) -> Vec<T>

source§

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GList> for T

source§

unsafe fn from_glib_none_as_vec(ptr: *mut GList) -> Vec<T>

source§

unsafe fn from_glib_container_as_vec(ptr: *mut GList) -> Vec<T>

source§

unsafe fn from_glib_full_as_vec(ptr: *mut GList) -> Vec<T>

source§

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GPtrArray> for T

source§

unsafe fn from_glib_none_as_vec(ptr: *mut GPtrArray) -> Vec<T>

source§

unsafe fn from_glib_container_as_vec(ptr: *mut GPtrArray) -> Vec<T>

source§

unsafe fn from_glib_full_as_vec(ptr: *mut GPtrArray) -> Vec<T>

source§

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GSList> for T

source§

unsafe fn from_glib_none_as_vec(ptr: *mut GSList) -> Vec<T>

source§

unsafe fn from_glib_container_as_vec(ptr: *mut GSList) -> Vec<T>

source§

unsafe fn from_glib_full_as_vec(ptr: *mut GSList) -> Vec<T>

source§

impl<O> GObjectExtManualGst for O
where O: IsA<Object>,

source§

fn set_property_from_str(&self, name: &str, value: &str)

source§

impl<O> GstObjectExt for O
where O: IsA<Object>,

source§

fn add_control_binding( &self, binding: &impl IsA<ControlBinding> ) -> Result<(), BoolError>

Attach the ControlBinding to the object. If there already was a ControlBinding for this property it will be replaced. Read more
source§

fn default_error(&self, error: &Error, debug: Option<&str>)

A default error function that uses g_printerr() to display the error message and the optional debug string.. Read more
source§

fn control_binding(&self, property_name: &str) -> Option<ControlBinding>

Gets the corresponding ControlBinding for the property. This should be unreferenced again after use. Read more
source§

fn control_rate(&self) -> Option<ClockTime>

Obtain the control-rate for this self. Audio processing Element objects will use this rate to sub-divide their processing loop and call sync_values() in between. The length of the processing segment should be up to control-rate nanoseconds. Read more
source§

fn name(&self) -> GString

Returns a copy of the name of self. Caller should g_free() the return value after usage. For a nameless object, this returns None, which you can safely g_free() as well. Read more
source§

fn parent(&self) -> Option<Object>

Returns the parent of self. This function increases the refcount of the parent object so you should gst_object_unref() it after usage. Read more
source§

fn path_string(&self) -> GString

Generates a string describing the path of self in the object hierarchy. Only useful (or used) for debugging. Read more
source§

fn value( &self, property_name: &str, timestamp: impl Into<Option<ClockTime>> ) -> Option<Value>

Gets the value for the given controlled property at the requested time. Read more
source§

fn has_active_control_bindings(&self) -> bool

Check if the self has active controlled properties. Read more
source§

fn has_ancestor(&self, ancestor: &impl IsA<Object>) -> bool

Check if self has an ancestor ancestor somewhere up in the hierarchy. One can e.g. check if a Element is inside a Pipeline. Read more
source§

fn has_as_ancestor(&self, ancestor: &impl IsA<Object>) -> bool

Check if self has an ancestor ancestor somewhere up in the hierarchy. One can e.g. check if a Element is inside a Pipeline. Read more
source§

fn has_as_parent(&self, parent: &impl IsA<Object>) -> bool

Check if parent is the parent of self. E.g. a Element can check if it owns a given Pad. Read more
source§

fn remove_control_binding(&self, binding: &impl IsA<ControlBinding>) -> bool

Removes the corresponding ControlBinding. If it was the last ref of the binding, it will be disposed. Read more
source§

fn set_control_binding_disabled(&self, property_name: &str, disabled: bool)

This function is used to disable the control bindings on a property for some time, i.e. sync_values() will do nothing for the property. Read more
source§

fn set_control_bindings_disabled(&self, disabled: bool)

This function is used to disable all controlled properties of the self for some time, i.e. sync_values() will do nothing. Read more
source§

fn set_control_rate(&self, control_rate: impl Into<Option<ClockTime>>)

Change the control-rate for this self. Audio processing Element objects will use this rate to sub-divide their processing loop and call sync_values() in between. The length of the processing segment should be up to control-rate nanoseconds. Read more
source§

fn set_parent(&self, parent: &impl IsA<Object>) -> Result<(), BoolError>

Sets the parent of self to parent. The object’s reference count will be incremented, and any floating reference will be removed (see gst_object_ref_sink()). Read more
source§

fn suggest_next_sync(&self) -> Option<ClockTime>

Returns a suggestion for timestamps where buffers should be split to get best controller results. Read more
source§

fn sync_values(&self, timestamp: ClockTime) -> Result<(), BoolError>

Sets the properties of the object, according to the GstControlSources that (maybe) handle them and for the given timestamp. Read more
source§

fn unparent(&self)

Clear the parent of self, removing the associated reference. This function decreases the refcount of self. Read more
source§

fn connect_parent_notify<F>(&self, f: F) -> SignalHandlerId
where F: Fn(&Self) + Send + Sync + 'static,

source§

impl<O> GstObjectExtManual for O
where O: IsA<Object>,

source§

fn connect_deep_notify<F>(&self, name: Option<&str>, f: F) -> SignalHandlerId
where F: Fn(&Self, &Object, &ParamSpec) + Send + Sync + 'static,

source§

fn set_object_flags(&self, flags: ObjectFlags)

source§

fn unset_object_flags(&self, flags: ObjectFlags)

source§

fn object_flags(&self) -> ObjectFlags

source§

fn g_value_array( &self, property_name: &str, timestamp: ClockTime, interval: ClockTime, values: &mut [Value] ) -> Result<(), BoolError>

source§

fn object_lock(&self) -> ObjectLockGuard<'_, Self>

source§

impl<T, U> Into<U> for T
where U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T> IntoClosureReturnValue for T
where T: Into<Value>,

source§

impl<U> IsSubclassableExt for U

source§

impl<T> ObjectExt for T
where T: ObjectType,

source§

fn is<U>(&self) -> bool
where U: StaticType,

Returns true if the object is an instance of (can be cast to) T.
source§

fn type_(&self) -> Type

Returns the type of the object.
source§

fn object_class(&self) -> &Class<Object>

Returns the ObjectClass of the object. Read more
source§

fn class(&self) -> &Class<T>
where T: IsClass,

Returns the class of the object.
source§

fn class_of<U>(&self) -> Option<&Class<U>>
where U: IsClass,

Returns the class of the object in the given type T. Read more
source§

fn interface<U>(&self) -> Option<InterfaceRef<'_, U>>
where U: IsInterface,

Returns the interface T of the object. Read more
source§

fn set_property(&self, property_name: &str, value: impl Into<Value>)

Sets the property property_name of the object to value value. Read more
source§

fn set_property_from_value(&self, property_name: &str, value: &Value)

Sets the property property_name of the object to value value. Read more
source§

fn set_properties(&self, property_values: &[(&str, &dyn ToValue)])

Sets multiple properties of the object at once. Read more
source§

fn set_properties_from_value(&self, property_values: &[(&str, Value)])

Sets multiple properties of the object at once. Read more
source§

fn property<V>(&self, property_name: &str) -> V
where V: for<'b> FromValue<'b> + 'static,

Gets the property property_name of the object and cast it to the type V. Read more
source§

fn property_value(&self, property_name: &str) -> Value

Gets the property property_name of the object. Read more
source§

fn has_property(&self, property_name: &str, type_: Option<Type>) -> bool

Check if the object has a property property_name of the given type_. Read more
source§

fn property_type(&self, property_name: &str) -> Option<Type>

Get the type of the property property_name of this object. Read more
source§

fn find_property(&self, property_name: &str) -> Option<ParamSpec>

Get the ParamSpec of the property property_name of this object.
source§

fn list_properties(&self) -> PtrSlice<ParamSpec>

Return all ParamSpec of the properties of this object.
source§

fn freeze_notify(&self) -> PropertyNotificationFreezeGuard

Freeze all property notifications until the return guard object is dropped. Read more
source§

unsafe fn set_qdata<QD>(&self, key: Quark, value: QD)
where QD: 'static,

Set arbitrary data on this object with the given key. Read more
source§

unsafe fn qdata<QD>(&self, key: Quark) -> Option<NonNull<QD>>
where QD: 'static,

Return previously set arbitrary data of this object with the given key. Read more
source§

unsafe fn steal_qdata<QD>(&self, key: Quark) -> Option<QD>
where QD: 'static,

Retrieve previously set arbitrary data of this object with the given key. Read more
source§

unsafe fn set_data<QD>(&self, key: &str, value: QD)
where QD: 'static,

Set arbitrary data on this object with the given key. Read more
source§

unsafe fn data<QD>(&self, key: &str) -> Option<NonNull<QD>>
where QD: 'static,

Return previously set arbitrary data of this object with the given key. Read more
source§

unsafe fn steal_data<QD>(&self, key: &str) -> Option<QD>
where QD: 'static,

Retrieve previously set arbitrary data of this object with the given key. Read more
source§

fn block_signal(&self, handler_id: &SignalHandlerId)

Block a given signal handler. Read more
source§

fn unblock_signal(&self, handler_id: &SignalHandlerId)

Unblock a given signal handler.
source§

fn stop_signal_emission(&self, signal_id: SignalId, detail: Option<Quark>)

Stop emission of the currently emitted signal.
source§

fn stop_signal_emission_by_name(&self, signal_name: &str)

Stop emission of the currently emitted signal by the (possibly detailed) signal name.
source§

fn connect<F>( &self, signal_name: &str, after: bool, callback: F ) -> SignalHandlerId
where F: Fn(&[Value]) -> Option<Value> + Send + Sync + 'static,

Connect to the signal signal_name on this object. Read more
source§

fn connect_id<F>( &self, signal_id: SignalId, details: Option<Quark>, after: bool, callback: F ) -> SignalHandlerId
where F: Fn(&[Value]) -> Option<Value> + Send + Sync + 'static,

Connect to the signal signal_id on this object. Read more
source§

fn connect_local<F>( &self, signal_name: &str, after: bool, callback: F ) -> SignalHandlerId
where F: Fn(&[Value]) -> Option<Value> + 'static,

Connect to the signal signal_name on this object. Read more
source§

fn connect_local_id<F>( &self, signal_id: SignalId, details: Option<Quark>, after: bool, callback: F ) -> SignalHandlerId
where F: Fn(&[Value]) -> Option<Value> + 'static,

Connect to the signal signal_id on this object. Read more
source§

unsafe fn connect_unsafe<F>( &self, signal_name: &str, after: bool, callback: F ) -> SignalHandlerId
where F: Fn(&[Value]) -> Option<Value>,

Connect to the signal signal_name on this object. Read more
source§

unsafe fn connect_unsafe_id<F>( &self, signal_id: SignalId, details: Option<Quark>, after: bool, callback: F ) -> SignalHandlerId
where F: Fn(&[Value]) -> Option<Value>,

Connect to the signal signal_id on this object. Read more
source§

fn connect_closure( &self, signal_name: &str, after: bool, closure: RustClosure ) -> SignalHandlerId

Connect a closure to the signal signal_name on this object. Read more
source§

fn connect_closure_id( &self, signal_id: SignalId, details: Option<Quark>, after: bool, closure: RustClosure ) -> SignalHandlerId

Connect a closure to the signal signal_id on this object. Read more
source§

fn watch_closure(&self, closure: &impl AsRef<Closure>)

Limits the lifetime of closure to the lifetime of the object. When the object’s reference count drops to zero, the closure will be invalidated. An invalidated closure will ignore any calls to invoke_with_values, or invoke when using Rust closures.
source§

fn emit<R>(&self, signal_id: SignalId, args: &[&dyn ToValue]) -> R

Emit signal by signal id. Read more
source§

fn emit_with_values(&self, signal_id: SignalId, args: &[Value]) -> Option<Value>

Same as Self::emit but takes Value for the arguments.
source§

fn emit_by_name<R>(&self, signal_name: &str, args: &[&dyn ToValue]) -> R

Emit signal by its name. Read more
source§

fn emit_by_name_with_values( &self, signal_name: &str, args: &[Value] ) -> Option<Value>

Emit signal by its name. Read more
source§

fn emit_by_name_with_details<R>( &self, signal_name: &str, details: Quark, args: &[&dyn ToValue] ) -> R

Emit signal by its name with details. Read more
source§

fn emit_by_name_with_details_and_values( &self, signal_name: &str, details: Quark, args: &[Value] ) -> Option<Value>

Emit signal by its name with details. Read more
source§

fn emit_with_details<R>( &self, signal_id: SignalId, details: Quark, args: &[&dyn ToValue] ) -> R

Emit signal by signal id with details. Read more
source§

fn emit_with_details_and_values( &self, signal_id: SignalId, details: Quark, args: &[Value] ) -> Option<Value>

Emit signal by signal id with details. Read more
source§

fn disconnect(&self, handler_id: SignalHandlerId)

Disconnect a previously connected signal handler.
source§

fn connect_notify<F>(&self, name: Option<&str>, f: F) -> SignalHandlerId
where F: Fn(&T, &ParamSpec) + Send + Sync + 'static,

Connect to the notify signal of the object. Read more
source§

fn connect_notify_local<F>(&self, name: Option<&str>, f: F) -> SignalHandlerId
where F: Fn(&T, &ParamSpec) + 'static,

Connect to the notify signal of the object. Read more
source§

unsafe fn connect_notify_unsafe<F>( &self, name: Option<&str>, f: F ) -> SignalHandlerId
where F: Fn(&T, &ParamSpec),

Connect to the notify signal of the object. Read more
source§

fn notify(&self, property_name: &str)

Notify that the given property has changed its value. Read more
source§

fn notify_by_pspec(&self, pspec: &ParamSpec)

Notify that the given property has changed its value. Read more
source§

fn downgrade(&self) -> WeakRef<T>

Downgrade this object to a weak reference.
source§

fn add_weak_ref_notify<F>(&self, f: F) -> WeakRefNotify<T>
where F: FnOnce() + Send + 'static,

Add a callback to be notified when the Object is disposed.
source§

fn add_weak_ref_notify_local<F>(&self, f: F) -> WeakRefNotify<T>
where F: FnOnce() + 'static,

Add a callback to be notified when the Object is disposed. Read more
source§

fn bind_property<'a, 'f, 't, O>( &'a self, source_property: &'a str, target: &'a O, target_property: &'a str ) -> BindingBuilder<'a, 'f, 't>
where O: ObjectType,

Bind property source_property on this object to the target_property on the target object. Read more
source§

fn ref_count(&self) -> u32

Returns the strong reference count of this object.
source§

unsafe fn run_dispose(&self)

Runs the dispose mechanism of the object. Read more
source§

impl<T> Property for T
where T: HasParamSpec,

§

type Value = T

source§

impl<T> PropertyGet for T
where T: HasParamSpec,

§

type Value = T

source§

fn get<R, F>(&self, f: F) -> R
where F: Fn(&<T as PropertyGet>::Value) -> R,

source§

impl<O> RTPBasePayloadExt for O
where O: IsA<RTPBasePayload>,

source§

fn allocate_output_buffer( &self, payload_len: u32, pad_len: u8, csrc_count: u8 ) -> Buffer

Allocate a new gst::Buffer with enough data to hold an RTP packet with minimum csrc_count CSRCs, a payload length of payload_len and padding of pad_len. If self has source-info true additional CSRCs may be allocated and filled with RTP source information. Read more
source§

fn source_count(&self, buffer: &Buffer) -> u32

Count the total number of RTP sources found in the meta of buffer, which will be automically added by allocate_output_buffer(). If source-info is false the count will be 0. Read more
source§

fn is_filled(&self, size: u32, duration: impl Into<Option<ClockTime>>) -> bool

Check if the packet with size and duration would exceed the configured maximum size. Read more
source§

fn is_source_info_enabled(&self) -> bool

Queries whether the payloader will add contributing sources (CSRCs) to the RTP header from GstRTPSourceMeta. Read more
source§

fn push(&self, buffer: Buffer) -> Result<FlowSuccess, FlowError>

Push buffer to the peer element of the payloader. The SSRC, payload type, seqnum and timestamp of the RTP buffer will be updated first. Read more
source§

fn push_list(&self, list: BufferList) -> Result<FlowSuccess, FlowError>

Push list to the peer element of the payloader. The SSRC, payload type, seqnum and timestamp of the RTP buffer will be updated first. Read more
source§

fn set_options( &self, media: &str, dynamic: bool, encoding_name: &str, clock_rate: u32 )

Set the rtp options of the payloader. These options will be set in the caps of the payloader. Subclasses must call this method before calling push() or gst_rtp_base_payload_set_outcaps(). Read more
source§

fn set_source_info_enabled(&self, enable: bool)

Enable or disable adding contributing sources to RTP packets from GstRTPSourceMeta. Read more
source§

fn is_auto_header_extension(&self) -> bool

If enabled, the payloader will automatically try to enable all the RTP header extensions provided in the src caps, saving the application the need to handle these extensions manually using the GstRTPBasePayload::request-extension: signal.
source§

fn set_auto_header_extension(&self, auto_header_extension: bool)

If enabled, the payloader will automatically try to enable all the RTP header extensions provided in the src caps, saving the application the need to handle these extensions manually using the GstRTPBasePayload::request-extension: signal.
source§

fn max_ptime(&self) -> i64

source§

fn set_max_ptime(&self, max_ptime: i64)

source§

fn min_ptime(&self) -> i64

Minimum duration of the packet data in ns (can’t go above MTU)
source§

fn set_min_ptime(&self, min_ptime: i64)

Minimum duration of the packet data in ns (can’t go above MTU)
source§

fn mtu(&self) -> u32

source§

fn set_mtu(&self, mtu: u32)

source§

fn is_onvif_no_rate_control(&self) -> bool

Make the payloader timestamp packets according to the Rate-Control=no behaviour specified in the ONVIF replay spec.
source§

fn set_onvif_no_rate_control(&self, onvif_no_rate_control: bool)

Make the payloader timestamp packets according to the Rate-Control=no behaviour specified in the ONVIF replay spec.
source§

fn is_perfect_rtptime(&self) -> bool

Try to use the offset fields to generate perfect RTP timestamps. When this option is disabled, RTP timestamps are generated from GST_BUFFER_PTS of each payloaded buffer. The PTSes of buffers may not necessarily increment with the amount of data in each input buffer, consider e.g. the case where the buffer arrives from a network which means that the PTS is unrelated to the amount of data. Because the RTP timestamps are generated from GST_BUFFER_PTS this can result in RTP timestamps that also don’t increment with the amount of data in the payloaded packet. To circumvent this it is possible to set the perfect rtptime option enabled. When this option is enabled the payloader will increment the RTP timestamps based on GST_BUFFER_OFFSET which relates to the amount of data in each packet rather than the GST_BUFFER_PTS of each buffer and therefore the RTP timestamps will more closely correlate with the amount of data in each buffer. Currently GstRTPBasePayload is limited to handling perfect RTP timestamps for audio streams.
source§

fn set_perfect_rtptime(&self, perfect_rtptime: bool)

Try to use the offset fields to generate perfect RTP timestamps. When this option is disabled, RTP timestamps are generated from GST_BUFFER_PTS of each payloaded buffer. The PTSes of buffers may not necessarily increment with the amount of data in each input buffer, consider e.g. the case where the buffer arrives from a network which means that the PTS is unrelated to the amount of data. Because the RTP timestamps are generated from GST_BUFFER_PTS this can result in RTP timestamps that also don’t increment with the amount of data in the payloaded packet. To circumvent this it is possible to set the perfect rtptime option enabled. When this option is enabled the payloader will increment the RTP timestamps based on GST_BUFFER_OFFSET which relates to the amount of data in each packet rather than the GST_BUFFER_PTS of each buffer and therefore the RTP timestamps will more closely correlate with the amount of data in each buffer. Currently GstRTPBasePayload is limited to handling perfect RTP timestamps for audio streams.
source§

fn pt(&self) -> u32

source§

fn set_pt(&self, pt: u32)

source§

fn ptime_multiple(&self) -> i64

Force buffers to be multiples of this duration in ns (0 disables)
source§

fn set_ptime_multiple(&self, ptime_multiple: i64)

Force buffers to be multiples of this duration in ns (0 disables)
source§

fn is_scale_rtptime(&self) -> bool

Make the RTP packets’ timestamps be scaled with the segment’s rate (corresponding to RTSP speed parameter). Disabling this property means the timestamps will not be affected by the set delivery speed (RTSP speed). Read more
source§

fn set_scale_rtptime(&self, scale_rtptime: bool)

Make the RTP packets’ timestamps be scaled with the segment’s rate (corresponding to RTSP speed parameter). Disabling this property means the timestamps will not be affected by the set delivery speed (RTSP speed). Read more
source§

fn seqnum(&self) -> u32

source§

fn seqnum_offset(&self) -> i32

source§

fn set_seqnum_offset(&self, seqnum_offset: i32)

source§

fn is_source_info(&self) -> bool

Enable writing the CSRC field in allocated RTP header based on RTP source information found in the input buffer’s GstRTPSourceMeta.
source§

fn set_source_info(&self, source_info: bool)

Enable writing the CSRC field in allocated RTP header based on RTP source information found in the input buffer’s GstRTPSourceMeta.
source§

fn ssrc(&self) -> u32

source§

fn set_ssrc(&self, ssrc: u32)

source§

fn stats(&self) -> Option<Structure>

Various payloader statistics retrieved atomically (and are therefore synchroized with each other), these can be used e.g. to generate an RTP-Info header. This property return a GstStructure named application/x-rtp-payload-stats containing the following fields relating to the last processed buffer and current state of the stream being payloaded: Read more
source§

fn timestamp(&self) -> u32

source§

fn timestamp_offset(&self) -> u32

source§

fn set_timestamp_offset(&self, timestamp_offset: u32)

source§

fn connect_add_extension<F: Fn(&Self, &RTPHeaderExtension) + Send + Sync + 'static>( &self, f: F ) -> SignalHandlerId

Add ext as an extension for writing part of an RTP header extension onto outgoing RTP packets. Read more
source§

fn emit_add_extension(&self, ext: &RTPHeaderExtension)

source§

fn connect_clear_extensions<F: Fn(&Self) + Send + Sync + 'static>( &self, f: F ) -> SignalHandlerId

Clear all RTP header extensions used by this payloader.
source§

fn emit_clear_extensions(&self)

source§

fn connect_request_extension<F: Fn(&Self, u32, &str) -> Option<RTPHeaderExtension> + Send + Sync + 'static>( &self, f: F ) -> SignalHandlerId

The returned ext must be configured with the correct ext_id and with the necessary attributes as required by the extension implementation. Read more
source§

fn connect_auto_header_extension_notify<F: Fn(&Self) + Send + Sync + 'static>( &self, f: F ) -> SignalHandlerId

source§

fn connect_max_ptime_notify<F: Fn(&Self) + Send + Sync + 'static>( &self, f: F ) -> SignalHandlerId

source§

fn connect_min_ptime_notify<F: Fn(&Self) + Send + Sync + 'static>( &self, f: F ) -> SignalHandlerId

source§

fn connect_mtu_notify<F: Fn(&Self) + Send + Sync + 'static>( &self, f: F ) -> SignalHandlerId

source§

fn connect_onvif_no_rate_control_notify<F: Fn(&Self) + Send + Sync + 'static>( &self, f: F ) -> SignalHandlerId

source§

fn connect_perfect_rtptime_notify<F: Fn(&Self) + Send + Sync + 'static>( &self, f: F ) -> SignalHandlerId

source§

fn connect_pt_notify<F: Fn(&Self) + Send + Sync + 'static>( &self, f: F ) -> SignalHandlerId

source§

fn connect_ptime_multiple_notify<F: Fn(&Self) + Send + Sync + 'static>( &self, f: F ) -> SignalHandlerId

source§

fn connect_scale_rtptime_notify<F: Fn(&Self) + Send + Sync + 'static>( &self, f: F ) -> SignalHandlerId

source§

fn connect_seqnum_notify<F: Fn(&Self) + Send + Sync + 'static>( &self, f: F ) -> SignalHandlerId

source§

fn connect_seqnum_offset_notify<F: Fn(&Self) + Send + Sync + 'static>( &self, f: F ) -> SignalHandlerId

source§

fn connect_source_info_notify<F: Fn(&Self) + Send + Sync + 'static>( &self, f: F ) -> SignalHandlerId

source§

fn connect_ssrc_notify<F: Fn(&Self) + Send + Sync + 'static>( &self, f: F ) -> SignalHandlerId

source§

fn connect_stats_notify<F: Fn(&Self) + Send + Sync + 'static>( &self, f: F ) -> SignalHandlerId

source§

fn connect_timestamp_notify<F: Fn(&Self) + Send + Sync + 'static>( &self, f: F ) -> SignalHandlerId

source§

fn connect_timestamp_offset_notify<F: Fn(&Self) + Send + Sync + 'static>( &self, f: F ) -> SignalHandlerId

source§

impl<O> RTPBasePayloadExtManual for O
where O: IsA<RTPBasePayload>,

source§

fn set_outcaps(&self, s: Option<&StructureRef>) -> Result<(), BoolError>

Configure the output caps with the optional fields. Read more
source§

fn extensions(&self) -> Vec<RTPHeaderExtension>

source§

fn connect_extensions_notify<F: Fn(&Self) + Send + Sync + 'static>( &self, f: F ) -> SignalHandlerId

source§

fn sink_pad(&self) -> &Pad

source§

fn src_pad(&self) -> &Pad

source§

impl<T> StaticTypeExt for T
where T: StaticType,

source§

fn ensure_type()

Ensures that the type has been registered with the type system.
source§

impl<T> ToOwned for T
where T: Clone,

§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
source§

impl<T> ToSendValue for T
where T: Send + ToValue + ?Sized,

source§

fn to_send_value(&self) -> SendValue

Returns a SendValue clone of self.
source§

impl<T> TransparentType for T

source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T> TryFromClosureReturnValue for T
where T: for<'a> FromValue<'a> + StaticType + 'static,

source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
source§

impl<'a, T, C, E> FromValueOptional<'a> for T
where T: FromValue<'a, Checker = C>, C: ValueTypeChecker<Error = ValueTypeMismatchOrNoneError<E>>, E: Error + Send + 'static,

source§

impl<Super, Sub> MayDowncastTo<Sub> for Super
where Super: IsA<Super>, Sub: IsA<Super>,