pub struct TransitionClip { /* private fields */ }Expand description
Creates an object that mixes together the two underlying objects, A and B. The A object is assumed to have a higher prioirity (lower number) than the B object. At the transition in point, only A will be visible, and by the end only B will be visible.
The shape of the video transition depends on the value of the “vtype” property. The default value is “crossfade”. For audio, only “crossfade” is supported.
The ID of the ExtractableType is the nickname of the vtype property value. Note that this value can be changed after creation and the GESExtractable.asset value will be updated when needed.
§Properties
§vtype
a VideoStandardTransitionType representing the wipe to use
Readable | Writeable | Construct
Clip
§duration-limit
The maximum duration that can be currently set
for the clip, taking into account the in-point,
max-duration, active, and
track properties of its children, as well as any
time effects. If there is no limit, this will be set to
GST_CLOCK_TIME_NONE.
Note that whilst a clip has no children in any tracks, the limit will
be unknown, and similarly set to GST_CLOCK_TIME_NONE.
If the duration-limit would ever go below the current
duration of the clip due to a change in the above
variables, its duration will be set to the new
limit.
Readable
§layer
The layer this clip lies in.
If you want to connect to this property’s notify signal,
you should connect to it with g_signal_connect_after() since the
signal emission may be stopped internally.
Readable
§supported-formats
The TrackType-s that the clip supports, which it can create
TrackElement-s for. Note that this can be a combination of
TrackType flags to indicate support for several
track-type elements.
Readable | Writeable | Construct
Container
§height
The span of the container’s children’s priority
values, which is the number of integers that lie between (inclusive)
the minimum and maximum priorities found amongst the container’s
children (maximum - minimum + 1).
Readable
TimelineElement
§duration
The duration that the element is in effect for in the timeline (a time difference in nanoseconds using the time coordinates of the timeline). For example, for a source element, this would determine for how long it should output its internal content for. For an operation element, this would determine for how long its effect should be applied to any source content.
Readable | Writeable
§in-point
The initial offset to use internally when outputting content (in nanoseconds, but in the time coordinates of the internal content).
For example, for a VideoUriSource that references some media
file, the “internal content” is the media file data, and the
in-point would correspond to some timestamp in the media file.
When playing the timeline, and when the element is first reached at
timeline-time start, it will begin outputting the
data from the timestamp in-point onwards, until it reaches the
end of its duration in the timeline.
For elements that have no internal content, this should be kept as 0.
Readable | Writeable
§max-duration
The full duration of internal content that is available (a time difference in nanoseconds using the time coordinates of the internal content).
This will act as a cap on the in-point of the
element (which is in the same time coordinates), and will sometimes
be used to limit the duration of the element in
the timeline.
For example, for a VideoUriSource that references some media
file, this would be the length of the media file.
For elements that have no internal content, or whose content is
indefinite, this should be kept as GST_CLOCK_TIME_NONE.
Readable | Writeable | Construct
§name
The name of the element. This should be unique within its timeline.
Readable | Writeable | Construct
§parent
The parent container of the element.
Readable | Writeable
§priority
The priority of the element.
Readable | Writeable
§serialize
Whether the element should be serialized.
Readable | Writeable
§start
The starting position of the element in the timeline (in nanoseconds and in the time coordinates of the timeline). For example, for a source element, this would determine the time at which it should start outputting its internal content. For an operation element, this would determine the time at which it should start applying its effect to any source content.
Readable | Writeable
§timeline
The timeline that the element lies within.
Readable | Writeable
§Implements
TransitionClipExt, [BaseTransitionClipExt][trait@crate::prelude::BaseTransitionClipExt], [OperationClipExt][trait@crate::prelude::OperationClipExt], ClipExt, GESContainerExt, TimelineElementExt, [trait@glib::ObjectExt], ExtractableExt, MetaContainerExt, [TimelineElementExtManual][trait@crate::prelude::TimelineElementExtManual]
GLib type: GObject with reference counted clone semantics.
Implementations§
source§impl TransitionClip
impl TransitionClip
pub const NONE: Option<&'static TransitionClip> = None
sourcepub fn new(vtype: VideoStandardTransitionType) -> Option<TransitionClip>
pub fn new(vtype: VideoStandardTransitionType) -> Option<TransitionClip>
Creates a new TransitionClip.
§vtype
the type of transition to create
§Returns
a newly created TransitionClip,
or None if something went wrong.
sourcepub fn for_nick(nick: &str) -> Option<TransitionClip>
pub fn for_nick(nick: &str) -> Option<TransitionClip>
Creates a new TransitionClip for the provided nick.
§nick
a string representing the type of transition to create
§Returns
The newly created TransitionClip,
or None if something went wrong
Trait Implementations§
source§impl Clone for TransitionClip
impl Clone for TransitionClip
source§impl Debug for TransitionClip
impl Debug for TransitionClip
source§impl HasParamSpec for TransitionClip
impl HasParamSpec for TransitionClip
type ParamSpec = ParamSpecObject
§type SetValue = TransitionClip
type SetValue = TransitionClip
Preferred value to be used as setter for the associated ParamSpec.
type BuilderFn = fn(_: &str) -> ParamSpecObjectBuilder<'_, TransitionClip>
fn param_spec_builder() -> Self::BuilderFn
source§impl Hash for TransitionClip
impl Hash for TransitionClip
source§impl Ord for TransitionClip
impl Ord for TransitionClip
source§fn cmp(&self, other: &Self) -> Ordering
fn cmp(&self, other: &Self) -> Ordering
Comparison for two GObjects.
Compares the memory addresses of the provided objects.
1.21.0 · source§fn max(self, other: Self) -> Selfwhere
Self: Sized,
fn max(self, other: Self) -> Selfwhere
Self: Sized,
Compares and returns the maximum of two values. Read more
source§impl ParentClassIs for TransitionClip
impl ParentClassIs for TransitionClip
type Parent = BaseTransitionClip
source§impl<OT: ObjectType> PartialEq<OT> for TransitionClip
impl<OT: ObjectType> PartialEq<OT> for TransitionClip
source§impl<OT: ObjectType> PartialOrd<OT> for TransitionClip
impl<OT: ObjectType> PartialOrd<OT> for TransitionClip
source§fn partial_cmp(&self, other: &OT) -> Option<Ordering>
fn partial_cmp(&self, other: &OT) -> Option<Ordering>
Partial comparison for two GObjects.
Compares the memory addresses of the provided objects.
1.0.0 · source§fn le(&self, other: &Rhs) -> bool
fn le(&self, other: &Rhs) -> bool
This method tests less than or equal to (for
self and other) and is used by the <=
operator. Read moresource§impl StaticType for TransitionClip
impl StaticType for TransitionClip
source§fn static_type() -> Type
fn static_type() -> Type
Returns the type identifier of
Self.impl Eq for TransitionClip
impl IsA<BaseTransitionClip> for TransitionClip
impl IsA<Clip> for TransitionClip
impl IsA<Container> for TransitionClip
impl IsA<Extractable> for TransitionClip
impl IsA<MetaContainer> for TransitionClip
impl IsA<OperationClip> for TransitionClip
impl IsA<TimelineElement> for TransitionClip
Auto Trait Implementations§
impl Freeze for TransitionClip
impl RefUnwindSafe for TransitionClip
impl !Send for TransitionClip
impl !Sync for TransitionClip
impl Unpin for TransitionClip
impl UnwindSafe for TransitionClip
Blanket Implementations§
source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more
source§impl<T> Cast for Twhere
T: ObjectType,
impl<T> Cast for Twhere
T: ObjectType,
source§fn upcast<T>(self) -> Twhere
T: ObjectType,
Self: IsA<T>,
fn upcast<T>(self) -> Twhere
T: ObjectType,
Self: IsA<T>,
Upcasts an object to a superclass or interface
T. Read moresource§fn upcast_ref<T>(&self) -> &Twhere
T: ObjectType,
Self: IsA<T>,
fn upcast_ref<T>(&self) -> &Twhere
T: ObjectType,
Self: IsA<T>,
Upcasts an object to a reference of its superclass or interface
T. Read moresource§fn downcast<T>(self) -> Result<T, Self>where
T: ObjectType,
Self: MayDowncastTo<T>,
fn downcast<T>(self) -> Result<T, Self>where
T: ObjectType,
Self: MayDowncastTo<T>,
Tries to downcast to a subclass or interface implementor
T. Read moresource§fn downcast_ref<T>(&self) -> Option<&T>where
T: ObjectType,
Self: MayDowncastTo<T>,
fn downcast_ref<T>(&self) -> Option<&T>where
T: ObjectType,
Self: MayDowncastTo<T>,
Tries to downcast to a reference of its subclass or interface implementor
T. Read moresource§fn dynamic_cast<T>(self) -> Result<T, Self>where
T: ObjectType,
fn dynamic_cast<T>(self) -> Result<T, Self>where
T: ObjectType,
Tries to cast to an object of type
T. This handles upcasting, downcasting
and casting between interface and interface implementors. All checks are performed at
runtime, while upcast will do many checks at compile-time already. downcast will
perform the same checks at runtime as dynamic_cast, but will also ensure some amount of
compile-time safety. Read moresource§fn dynamic_cast_ref<T>(&self) -> Option<&T>where
T: ObjectType,
fn dynamic_cast_ref<T>(&self) -> Option<&T>where
T: ObjectType,
Tries to cast to reference to an object of type
T. This handles upcasting, downcasting
and casting between interface and interface implementors. All checks are performed at
runtime, while downcast and upcast will do many checks at compile-time already. Read moresource§unsafe fn unsafe_cast<T>(self) -> Twhere
T: ObjectType,
unsafe fn unsafe_cast<T>(self) -> Twhere
T: ObjectType,
Casts to
T unconditionally. Read moresource§unsafe fn unsafe_cast_ref<T>(&self) -> &Twhere
T: ObjectType,
unsafe fn unsafe_cast_ref<T>(&self) -> &Twhere
T: ObjectType,
Casts to
&T unconditionally. Read moresource§impl<O> ClipExt for O
impl<O> ClipExt for O
source§fn add_asset(&self, asset: &impl IsA<Asset>) -> Result<TrackElement, BoolError>
fn add_asset(&self, asset: &impl IsA<Asset>) -> Result<TrackElement, BoolError>
Extracts a
TrackElement from an asset and adds it to the clip.
This can be used to add effects that derive from the asset to the
clip, but this method is not intended to be used to create the core
elements of the clip. Read moresource§fn add_child_to_track(
&self,
child: &impl IsA<TrackElement>,
track: &impl IsA<Track>,
) -> Result<TrackElement, Error>
fn add_child_to_track( &self, child: &impl IsA<TrackElement>, track: &impl IsA<Track>, ) -> Result<TrackElement, Error>
Adds the track element child of the clip to a specific track. Read more
source§fn add_top_effect(
&self,
effect: &impl IsA<BaseEffect>,
index: i32,
) -> Result<(), Error>
fn add_top_effect( &self, effect: &impl IsA<BaseEffect>, index: i32, ) -> Result<(), Error>
Add a top effect to a clip at the given index. Read more
source§fn find_track_element(
&self,
track: Option<&impl IsA<Track>>,
type_: Type,
) -> Option<TrackElement>
fn find_track_element( &self, track: Option<&impl IsA<Track>>, type_: Type, ) -> Option<TrackElement>
Finds an element controlled by the clip. If
track is given,
then only the track elements in track are searched for. If type_ is
given, then this function searches for a track element of the given
type_. Read moresource§fn find_track_elements(
&self,
track: Option<&impl IsA<Track>>,
track_type: TrackType,
type_: Type,
) -> Vec<TrackElement>
fn find_track_elements( &self, track: Option<&impl IsA<Track>>, track_type: TrackType, type_: Type, ) -> Vec<TrackElement>
Finds the
TrackElement-s controlled by the clip that match the
given criteria. If track is given as None and track_type is given as
TrackType::UNKNOWN, then the search will match all elements in any
track, including those with no track, and of any
track-type. Otherwise, if track is not None, but
track_type is TrackType::UNKNOWN, then only the track elements in
track are searched for. Otherwise, if track_type is not
TrackType::UNKNOWN, but track is None, then only the track
elements whose track-type matches track_type are
searched for. Otherwise, when both are given, the track elements that
match either criteria are searched for. Therefore, if you wish to
only find elements in a specific track, you should give the track as
track, but you should not give the track’s track-type as
track_type because this would also select elements from other tracks
of the same type. Read moresource§fn duration_limit(&self) -> ClockTime
fn duration_limit(&self) -> ClockTime
Gets the
duration-limit of the clip. Read moresource§fn internal_time_from_timeline_time(
&self,
child: &impl IsA<TrackElement>,
timeline_time: impl Into<Option<ClockTime>>,
) -> Result<Option<ClockTime>, Error>
fn internal_time_from_timeline_time( &self, child: &impl IsA<TrackElement>, timeline_time: impl Into<Option<ClockTime>>, ) -> Result<Option<ClockTime>, Error>
Convert the timeline time to an internal source time of the child.
This will take any time effects placed on the clip into account (see
BaseEffect for what time effects are supported, and how to
declare them in GES). Read moresource§fn supported_formats(&self) -> TrackType
fn supported_formats(&self) -> TrackType
Gets the
supported-formats of the clip. Read moresource§fn timeline_time_from_internal_time(
&self,
child: &impl IsA<TrackElement>,
internal_time: impl Into<Option<ClockTime>>,
) -> Result<Option<ClockTime>, Error>
fn timeline_time_from_internal_time( &self, child: &impl IsA<TrackElement>, internal_time: impl Into<Option<ClockTime>>, ) -> Result<Option<ClockTime>, Error>
Convert the internal source time from the child to a timeline time.
This will take any time effects placed on the clip into account (see
BaseEffect for what time effects are supported, and how to
declare them in GES). Read moresource§fn timeline_time_from_source_frame(
&self,
frame_number: FrameNumber,
) -> Result<Option<ClockTime>, Error>
fn timeline_time_from_source_frame( &self, frame_number: FrameNumber, ) -> Result<Option<ClockTime>, Error>
Convert the source frame number to a timeline time. This acts the same
as
timeline_time_from_internal_time() using the core
children of the clip and using the frame number to specify the internal
position, rather than a timestamp. Read moresource§fn top_effect_index(&self, effect: &impl IsA<BaseEffect>) -> i32
fn top_effect_index(&self, effect: &impl IsA<BaseEffect>) -> i32
Gets the internal index of an effect in the clip. The index of effects
in a clip will run from 0 to n-1, where n is the total number of
effects. If two effects share the same
track, the
effect with the numerically lower index will be applied to the source
data after the other effect, i.e. output data will always flow from
a higher index effect to a lower index effect. Read morefn top_effect_position(&self, effect: &impl IsA<BaseEffect>) -> i32
source§fn top_effects(&self) -> Vec<TrackElement>
fn top_effects(&self) -> Vec<TrackElement>
Gets the
BaseEffect-s that have been added to the clip. The
returned list is ordered by their internal index in the clip. See
top_effect_index(). Read moresource§fn move_to_layer(&self, layer: &impl IsA<Layer>) -> Result<(), BoolError>
fn move_to_layer(&self, layer: &impl IsA<Layer>) -> Result<(), BoolError>
See
move_to_layer_full(), which also gives an error. Read moresource§fn move_to_layer_full(&self, layer: &impl IsA<Layer>) -> Result<(), Error>
fn move_to_layer_full(&self, layer: &impl IsA<Layer>) -> Result<(), Error>
Moves a clip to a new layer. If the clip already exists in a layer, it
is first removed from its current layer before being added to the new
layer. Read more
source§fn remove_top_effect(&self, effect: &impl IsA<BaseEffect>) -> Result<(), Error>
fn remove_top_effect(&self, effect: &impl IsA<BaseEffect>) -> Result<(), Error>
Remove a top effect from the clip. Read more
source§fn set_supported_formats(&self, supportedformats: TrackType)
fn set_supported_formats(&self, supportedformats: TrackType)
Sets the
supported-formats of the clip. This should normally
only be called by subclasses, which should be responsible for updating
its value, rather than the user. Read moresource§fn set_top_effect_index(
&self,
effect: &impl IsA<BaseEffect>,
newindex: u32,
) -> Result<(), BoolError>
fn set_top_effect_index( &self, effect: &impl IsA<BaseEffect>, newindex: u32, ) -> Result<(), BoolError>
See
set_top_effect_index_full(), which also gives an error. Read moresource§fn set_top_effect_index_full(
&self,
effect: &impl IsA<BaseEffect>,
newindex: u32,
) -> Result<(), Error>
fn set_top_effect_index_full( &self, effect: &impl IsA<BaseEffect>, newindex: u32, ) -> Result<(), Error>
Set the index of an effect within the clip. See
top_effect_index(). The new index must be an existing
index of the clip. The effect is moved to the new index, and the other
effects may be shifted in index accordingly to otherwise maintain the
ordering. Read morefn set_top_effect_priority( &self, effect: &impl IsA<BaseEffect>, newpriority: u32, ) -> Result<(), BoolError>
source§fn split(&self, position: u64) -> Result<Clip, BoolError>
fn split(&self, position: u64) -> Result<Clip, BoolError>
See
split_full(), which also gives an error. Read morefn connect_duration_limit_notify<F: Fn(&Self) + 'static>( &self, f: F, ) -> SignalHandlerId
fn connect_layer_notify<F: Fn(&Self) + 'static>(&self, f: F) -> SignalHandlerId
fn connect_supported_formats_notify<F: Fn(&Self) + 'static>( &self, f: F, ) -> SignalHandlerId
source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
source§default unsafe fn clone_to_uninit(&self, dst: *mut T)
default unsafe fn clone_to_uninit(&self, dst: *mut T)
🔬This is a nightly-only experimental API. (
clone_to_uninit)source§impl<O> ExtractableExt for Owhere
O: IsA<Extractable>,
impl<O> ExtractableExt for Owhere
O: IsA<Extractable>,
source§fn asset(&self) -> Option<Asset>
fn asset(&self) -> Option<Asset>
Get the asset that has been set on the extractable object. Read more
source§fn id(&self) -> GString
fn id(&self) -> GString
Gets the
id of some associated asset. It may be the case
that the object has no set asset, or even that such an asset does not
yet exist in the GES cache. Instead, this will return the asset
id that is compatible with the current state of the object,
as determined by the Extractable implementer. If it was indeed
extracted from an asset, this should return the same as its
corresponding asset id. Read moresource§impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GList> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GList> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
source§impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GPtrArray> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GPtrArray> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
source§impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GSList> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GSList> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
source§impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GList> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GList> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
source§impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GPtrArray> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GPtrArray> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
source§impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GSList> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GSList> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
source§impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GList> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GList> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
unsafe fn from_glib_none_as_vec(ptr: *const GList) -> Vec<T>
unsafe fn from_glib_container_as_vec(_: *const GList) -> Vec<T>
unsafe fn from_glib_full_as_vec(_: *const GList) -> Vec<T>
source§impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GPtrArray> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GPtrArray> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
unsafe fn from_glib_none_as_vec(ptr: *const GPtrArray) -> Vec<T>
unsafe fn from_glib_container_as_vec(_: *const GPtrArray) -> Vec<T>
unsafe fn from_glib_full_as_vec(_: *const GPtrArray) -> Vec<T>
source§impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GSList> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GSList> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
unsafe fn from_glib_none_as_vec(ptr: *const GSList) -> Vec<T>
unsafe fn from_glib_container_as_vec(_: *const GSList) -> Vec<T>
unsafe fn from_glib_full_as_vec(_: *const GSList) -> Vec<T>
source§impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GList> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GList> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
unsafe fn from_glib_none_as_vec(ptr: *mut GList) -> Vec<T>
unsafe fn from_glib_container_as_vec(ptr: *mut GList) -> Vec<T>
unsafe fn from_glib_full_as_vec(ptr: *mut GList) -> Vec<T>
source§impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GPtrArray> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GPtrArray> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
unsafe fn from_glib_none_as_vec(ptr: *mut GPtrArray) -> Vec<T>
unsafe fn from_glib_container_as_vec(ptr: *mut GPtrArray) -> Vec<T>
unsafe fn from_glib_full_as_vec(ptr: *mut GPtrArray) -> Vec<T>
source§impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GSList> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GSList> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
unsafe fn from_glib_none_as_vec(ptr: *mut GSList) -> Vec<T>
unsafe fn from_glib_container_as_vec(ptr: *mut GSList) -> Vec<T>
unsafe fn from_glib_full_as_vec(ptr: *mut GSList) -> Vec<T>
source§impl<O> GESContainerExt for O
impl<O> GESContainerExt for O
source§fn add(&self, child: &impl IsA<TimelineElement>) -> Result<(), BoolError>
fn add(&self, child: &impl IsA<TimelineElement>) -> Result<(), BoolError>
Adds a timeline element to the container. The element will now be a
child of the container (and the container will be the
parent of the added element), which means that it
is now controlled by the container. This may change the properties of
the child or the container, depending on the subclass. Read moresource§fn edit(
&self,
layers: &[Layer],
new_layer_priority: i32,
mode: EditMode,
edge: Edge,
position: u64,
) -> Result<(), BoolError>
fn edit( &self, layers: &[Layer], new_layer_priority: i32, mode: EditMode, edge: Edge, position: u64, ) -> Result<(), BoolError>
👎Deprecated: Since 1.18
Edits the container within its timeline. Read more
source§fn remove(&self, child: &impl IsA<TimelineElement>) -> Result<(), BoolError>
fn remove(&self, child: &impl IsA<TimelineElement>) -> Result<(), BoolError>
Removes a timeline element from the container. The element will no
longer be controlled by the container. Read more
source§fn ungroup(self, recursive: bool) -> Vec<Container>
fn ungroup(self, recursive: bool) -> Vec<Container>
Ungroups the container by splitting it into several containers
containing various children of the original. The rules for how the
container splits depends on the subclass. A
Group will simply split
into its children. A Clip will split into one Clip per
TrackType it overlaps with (so an audio-video clip will split into
an audio clip and a video clip), where each clip contains all the
TrackElement-s from the original clip with a matching
track-type. Read moresource§fn height(&self) -> u32
fn height(&self) -> u32
The span of the container’s children’s
priority
values, which is the number of integers that lie between (inclusive)
the minimum and maximum priorities found amongst the container’s
children (maximum - minimum + 1).source§fn connect_child_added<F: Fn(&Self, &TimelineElement) + 'static>(
&self,
f: F,
) -> SignalHandlerId
fn connect_child_added<F: Fn(&Self, &TimelineElement) + 'static>( &self, f: F, ) -> SignalHandlerId
Will be emitted after a child is added to the container. Usually,
you should connect with
g_signal_connect_after() since the signal
may be stopped internally. Read moresource§fn connect_child_removed<F: Fn(&Self, &TimelineElement) + 'static>(
&self,
f: F,
) -> SignalHandlerId
fn connect_child_removed<F: Fn(&Self, &TimelineElement) + 'static>( &self, f: F, ) -> SignalHandlerId
Will be emitted after a child is removed from the container. Read more
fn connect_height_notify<F: Fn(&Self) + 'static>(&self, f: F) -> SignalHandlerId
source§impl<O> GObjectExtManualGst for O
impl<O> GObjectExtManualGst for O
fn set_property_from_str(&self, name: &str, value: &str)
source§impl<T> IntoClosureReturnValue for T
impl<T> IntoClosureReturnValue for T
fn into_closure_return_value(self) -> Option<Value>
source§impl<T> IntoEither for T
impl<T> IntoEither for T
source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
Converts
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moresource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
Converts
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moresource§impl<U> IsSubclassableExt for Uwhere
U: IsClass + ParentClassIs,
impl<U> IsSubclassableExt for Uwhere
U: IsClass + ParentClassIs,
fn parent_class_init<T>(class: &mut Class<U>)
fn parent_instance_init<T>(instance: &mut InitializingObject<T>)
source§impl<O> MetaContainerExt for Owhere
O: IsA<MetaContainer>,
impl<O> MetaContainerExt for Owhere
O: IsA<MetaContainer>,
source§fn add_metas_from_string(&self, str: &str) -> bool
fn add_metas_from_string(&self, str: &str) -> bool
Deserializes the given string, and adds and sets the found fields and
their values on the container. The string should be the return of
metas_to_string(). Read moresource§fn check_meta_registered(&self, meta_item: &str) -> Option<(MetaFlag, Type)>
fn check_meta_registered(&self, meta_item: &str) -> Option<(MetaFlag, Type)>
Checks whether the specified field has been registered as static, and
gets the registered type and flags of the field, as used in
register_meta() and
register_static_meta(). Read moresource§fn foreach<P: FnMut(&MetaContainer, &str, &Value)>(&self, func: P)
fn foreach<P: FnMut(&MetaContainer, &str, &Value)>(&self, func: P)
Calls the given function on each of the meta container’s set metadata
fields. Read more
source§fn boolean(&self, meta_item: &str) -> Option<bool>
fn boolean(&self, meta_item: &str) -> Option<bool>
Gets the current boolean value of the specified field of the meta
container. If the field does not have a set value, or it is of the
wrong type, the method will fail. Read more
source§fn date(&self, meta_item: &str) -> Option<Date>
fn date(&self, meta_item: &str) -> Option<Date>
Gets the current date value of the specified field of the meta
container. If the field does not have a set value, or it is of the
wrong type, the method will fail. Read more
source§fn date_time(&self, meta_item: &str) -> Option<DateTime>
fn date_time(&self, meta_item: &str) -> Option<DateTime>
Gets the current date time value of the specified field of the meta
container. If the field does not have a set value, or it is of the
wrong type, the method will fail. Read more
source§fn double(&self, meta_item: &str) -> Option<f64>
fn double(&self, meta_item: &str) -> Option<f64>
Gets the current double value of the specified field of the meta
container. If the field does not have a set value, or it is of the
wrong type, the method will fail. Read more
source§fn float(&self, meta_item: &str) -> Option<f32>
fn float(&self, meta_item: &str) -> Option<f32>
Gets the current float value of the specified field of the meta
container. If the field does not have a set value, or it is of the
wrong type, the method will fail. Read more
source§fn int(&self, meta_item: &str) -> Option<i32>
fn int(&self, meta_item: &str) -> Option<i32>
Gets the current int value of the specified field of the meta
container. If the field does not have a set value, or it is of the
wrong type, the method will fail. Read more
source§fn int64(&self, meta_item: &str) -> Option<i64>
fn int64(&self, meta_item: &str) -> Option<i64>
Gets the current int64 value of the specified field of the meta
container. If the field does not have a set value, or it is of the
wrong type, the method will fail. Read more
source§fn marker_list(&self, key: &str) -> Option<MarkerList>
fn marker_list(&self, key: &str) -> Option<MarkerList>
Gets the current marker list value of the specified field of the meta
container. If the field does not have a set value, or it is of the
wrong type, the method will fail. Read more
source§fn meta(&self, key: &str) -> Option<Value>
fn meta(&self, key: &str) -> Option<Value>
Gets the current value of the specified field of the meta container. Read more
source§fn string(&self, meta_item: &str) -> Option<GString>
fn string(&self, meta_item: &str) -> Option<GString>
Gets the current string value of the specified field of the meta
container. If the field does not have a set value, or it is of the
wrong type, the method will fail. Read more
source§fn uint(&self, meta_item: &str) -> Option<u32>
fn uint(&self, meta_item: &str) -> Option<u32>
Gets the current uint value of the specified field of the meta
container. If the field does not have a set value, or it is of the
wrong type, the method will fail. Read more
source§fn uint64(&self, meta_item: &str) -> Option<u64>
fn uint64(&self, meta_item: &str) -> Option<u64>
Gets the current uint64 value of the specified field of the meta
container. If the field does not have a set value, or it is of the
wrong type, the method will fail. Read more
source§fn metas_to_string(&self) -> GString
fn metas_to_string(&self) -> GString
Serializes the set metadata fields of the meta container to a string. Read more
source§fn register_meta(&self, flags: MetaFlag, meta_item: &str, value: &Value) -> bool
fn register_meta(&self, flags: MetaFlag, meta_item: &str, value: &Value) -> bool
Sets the value of the specified field of the meta container to the
given value, and registers the field to only hold a value of the
same type. After calling this, only values of the same type as
value
can be set for this field. The given flags can be set to make this
field only readable after calling this method. Read moresource§fn register_meta_boolean(
&self,
flags: MetaFlag,
meta_item: &str,
value: bool,
) -> bool
fn register_meta_boolean( &self, flags: MetaFlag, meta_item: &str, value: bool, ) -> bool
Sets the value of the specified field of the meta container to the
given boolean value, and registers the field to only hold a boolean
typed value. After calling this, only boolean values can be set for
this field. The given flags can be set to make this field only
readable after calling this method. Read more
source§fn register_meta_date(
&self,
flags: MetaFlag,
meta_item: &str,
value: &Date,
) -> bool
fn register_meta_date( &self, flags: MetaFlag, meta_item: &str, value: &Date, ) -> bool
Sets the value of the specified field of the meta container to the
given date value, and registers the field to only hold a date
typed value. After calling this, only date values can be set for
this field. The given flags can be set to make this field only
readable after calling this method. Read more
source§fn register_meta_date_time(
&self,
flags: MetaFlag,
meta_item: &str,
value: &DateTime,
) -> bool
fn register_meta_date_time( &self, flags: MetaFlag, meta_item: &str, value: &DateTime, ) -> bool
Sets the value of the specified field of the meta container to the
given date time value, and registers the field to only hold a date time
typed value. After calling this, only date time values can be set for
this field. The given flags can be set to make this field only
readable after calling this method. Read more
source§fn register_meta_double(
&self,
flags: MetaFlag,
meta_item: &str,
value: f64,
) -> bool
fn register_meta_double( &self, flags: MetaFlag, meta_item: &str, value: f64, ) -> bool
Sets the value of the specified field of the meta container to the
given double value, and registers the field to only hold a double
typed value. After calling this, only double values can be set for
this field. The given flags can be set to make this field only
readable after calling this method. Read more
source§fn register_meta_float(
&self,
flags: MetaFlag,
meta_item: &str,
value: f32,
) -> bool
fn register_meta_float( &self, flags: MetaFlag, meta_item: &str, value: f32, ) -> bool
Sets the value of the specified field of the meta container to the
given float value, and registers the field to only hold a float
typed value. After calling this, only float values can be set for
this field. The given flags can be set to make this field only
readable after calling this method. Read more
source§fn register_meta_int(
&self,
flags: MetaFlag,
meta_item: &str,
value: i32,
) -> bool
fn register_meta_int( &self, flags: MetaFlag, meta_item: &str, value: i32, ) -> bool
Sets the value of the specified field of the meta container to the
given int value, and registers the field to only hold an int
typed value. After calling this, only int values can be set for
this field. The given flags can be set to make this field only
readable after calling this method. Read more
source§fn register_meta_int64(
&self,
flags: MetaFlag,
meta_item: &str,
value: i64,
) -> bool
fn register_meta_int64( &self, flags: MetaFlag, meta_item: &str, value: i64, ) -> bool
Sets the value of the specified field of the meta container to the
given int64 value, and registers the field to only hold an int64
typed value. After calling this, only int64 values can be set for
this field. The given flags can be set to make this field only
readable after calling this method. Read more
source§fn register_meta_string(
&self,
flags: MetaFlag,
meta_item: &str,
value: &str,
) -> bool
fn register_meta_string( &self, flags: MetaFlag, meta_item: &str, value: &str, ) -> bool
Sets the value of the specified field of the meta container to the
given string value, and registers the field to only hold a string
typed value. After calling this, only string values can be set for
this field. The given flags can be set to make this field only
readable after calling this method. Read more
source§fn register_meta_uint(
&self,
flags: MetaFlag,
meta_item: &str,
value: u32,
) -> bool
fn register_meta_uint( &self, flags: MetaFlag, meta_item: &str, value: u32, ) -> bool
Sets the value of the specified field of the meta container to the
given uint value, and registers the field to only hold a uint
typed value. After calling this, only uint values can be set for
this field. The given flags can be set to make this field only
readable after calling this method. Read more
source§fn register_meta_uint64(
&self,
flags: MetaFlag,
meta_item: &str,
value: u64,
) -> bool
fn register_meta_uint64( &self, flags: MetaFlag, meta_item: &str, value: u64, ) -> bool
Sets the value of the specified field of the meta container to the
given uint64 value, and registers the field to only hold a uint64
typed value. After calling this, only uint64 values can be set for
this field. The given flags can be set to make this field only
readable after calling this method. Read more
source§fn register_static_meta(
&self,
flags: MetaFlag,
meta_item: &str,
type_: Type,
) -> bool
fn register_static_meta( &self, flags: MetaFlag, meta_item: &str, type_: Type, ) -> bool
Registers a static metadata field on the container to only hold the
specified type. After calling this, setting a value under this field
can only succeed if its type matches the registered type of the field. Read more
source§fn set_boolean(&self, meta_item: &str, value: bool) -> bool
fn set_boolean(&self, meta_item: &str, value: bool) -> bool
Sets the value of the specified field of the meta container to the
given boolean value. Read more
source§fn set_date(&self, meta_item: &str, value: &Date) -> bool
fn set_date(&self, meta_item: &str, value: &Date) -> bool
Sets the value of the specified field of the meta container to the
given date value. Read more
source§fn set_date_time(&self, meta_item: &str, value: &DateTime) -> bool
fn set_date_time(&self, meta_item: &str, value: &DateTime) -> bool
Sets the value of the specified field of the meta container to the
given date time value. Read more
source§fn set_double(&self, meta_item: &str, value: f64) -> bool
fn set_double(&self, meta_item: &str, value: f64) -> bool
Sets the value of the specified field of the meta container to the
given double value. Read more
source§fn set_float(&self, meta_item: &str, value: f32) -> bool
fn set_float(&self, meta_item: &str, value: f32) -> bool
Sets the value of the specified field of the meta container to the
given float value. Read more
source§fn set_int(&self, meta_item: &str, value: i32) -> bool
fn set_int(&self, meta_item: &str, value: i32) -> bool
Sets the value of the specified field of the meta container to the
given int value. Read more
source§fn set_int64(&self, meta_item: &str, value: i64) -> bool
fn set_int64(&self, meta_item: &str, value: i64) -> bool
Sets the value of the specified field of the meta container to the
given int64 value. Read more
source§fn set_marker_list(&self, meta_item: &str, list: &MarkerList) -> bool
fn set_marker_list(&self, meta_item: &str, list: &MarkerList) -> bool
Sets the value of the specified field of the meta container to the
given marker list value. Read more
source§fn set_string(&self, meta_item: &str, value: &str) -> bool
fn set_string(&self, meta_item: &str, value: &str) -> bool
Sets the value of the specified field of the meta container to the
given string value. Read more
source§fn set_uint(&self, meta_item: &str, value: u32) -> bool
fn set_uint(&self, meta_item: &str, value: u32) -> bool
Sets the value of the specified field of the meta container to the
given uint value. Read more
source§fn set_uint64(&self, meta_item: &str, value: u64) -> bool
fn set_uint64(&self, meta_item: &str, value: u64) -> bool
Sets the value of the specified field of the meta container to the
given uint64 value. Read more
source§impl<T> ObjectExt for Twhere
T: ObjectType,
impl<T> ObjectExt for Twhere
T: ObjectType,
source§fn is<U>(&self) -> boolwhere
U: StaticType,
fn is<U>(&self) -> boolwhere
U: StaticType,
Returns
true if the object is an instance of (can be cast to) T.source§fn object_class(&self) -> &Class<Object>
fn object_class(&self) -> &Class<Object>
Returns the
ObjectClass of the object. Read moresource§fn class_of<U>(&self) -> Option<&Class<U>>where
U: IsClass,
fn class_of<U>(&self) -> Option<&Class<U>>where
U: IsClass,
Returns the class of the object in the given type
T. Read moresource§fn interface<U>(&self) -> Option<InterfaceRef<'_, U>>where
U: IsInterface,
fn interface<U>(&self) -> Option<InterfaceRef<'_, U>>where
U: IsInterface,
Returns the interface
T of the object. Read moresource§fn set_property_from_value(&self, property_name: &str, value: &Value)
fn set_property_from_value(&self, property_name: &str, value: &Value)
source§fn set_properties(&self, property_values: &[(&str, &dyn ToValue)])
fn set_properties(&self, property_values: &[(&str, &dyn ToValue)])
Sets multiple properties of the object at once. Read more
source§fn set_properties_from_value(&self, property_values: &[(&str, Value)])
fn set_properties_from_value(&self, property_values: &[(&str, Value)])
Sets multiple properties of the object at once. Read more
source§fn property<V>(&self, property_name: &str) -> Vwhere
V: for<'b> FromValue<'b> + 'static,
fn property<V>(&self, property_name: &str) -> Vwhere
V: for<'b> FromValue<'b> + 'static,
Gets the property
property_name of the object and cast it to the type V. Read moresource§fn property_value(&self, property_name: &str) -> Value
fn property_value(&self, property_name: &str) -> Value
Gets the property
property_name of the object. Read moresource§fn property_type(&self, property_name: &str) -> Option<Type>
fn property_type(&self, property_name: &str) -> Option<Type>
Get the type of the property
property_name of this object. Read moresource§fn find_property(&self, property_name: &str) -> Option<ParamSpec>
fn find_property(&self, property_name: &str) -> Option<ParamSpec>
Get the
ParamSpec of the property property_name of this object.source§fn list_properties(&self) -> PtrSlice<ParamSpec>
fn list_properties(&self) -> PtrSlice<ParamSpec>
Return all
ParamSpec of the properties of this object.source§fn freeze_notify(&self) -> PropertyNotificationFreezeGuard
fn freeze_notify(&self) -> PropertyNotificationFreezeGuard
Freeze all property notifications until the return guard object is dropped. Read more
source§unsafe fn set_qdata<QD>(&self, key: Quark, value: QD)where
QD: 'static,
unsafe fn set_qdata<QD>(&self, key: Quark, value: QD)where
QD: 'static,
Set arbitrary data on this object with the given
key. Read moresource§unsafe fn qdata<QD>(&self, key: Quark) -> Option<NonNull<QD>>where
QD: 'static,
unsafe fn qdata<QD>(&self, key: Quark) -> Option<NonNull<QD>>where
QD: 'static,
Return previously set arbitrary data of this object with the given
key. Read moresource§unsafe fn steal_qdata<QD>(&self, key: Quark) -> Option<QD>where
QD: 'static,
unsafe fn steal_qdata<QD>(&self, key: Quark) -> Option<QD>where
QD: 'static,
Retrieve previously set arbitrary data of this object with the given
key. Read moresource§unsafe fn set_data<QD>(&self, key: &str, value: QD)where
QD: 'static,
unsafe fn set_data<QD>(&self, key: &str, value: QD)where
QD: 'static,
Set arbitrary data on this object with the given
key. Read moresource§unsafe fn data<QD>(&self, key: &str) -> Option<NonNull<QD>>where
QD: 'static,
unsafe fn data<QD>(&self, key: &str) -> Option<NonNull<QD>>where
QD: 'static,
Return previously set arbitrary data of this object with the given
key. Read moresource§unsafe fn steal_data<QD>(&self, key: &str) -> Option<QD>where
QD: 'static,
unsafe fn steal_data<QD>(&self, key: &str) -> Option<QD>where
QD: 'static,
Retrieve previously set arbitrary data of this object with the given
key. Read moresource§fn block_signal(&self, handler_id: &SignalHandlerId)
fn block_signal(&self, handler_id: &SignalHandlerId)
Block a given signal handler. Read more
source§fn unblock_signal(&self, handler_id: &SignalHandlerId)
fn unblock_signal(&self, handler_id: &SignalHandlerId)
Unblock a given signal handler.
source§fn stop_signal_emission(&self, signal_id: SignalId, detail: Option<Quark>)
fn stop_signal_emission(&self, signal_id: SignalId, detail: Option<Quark>)
Stop emission of the currently emitted signal.
source§fn stop_signal_emission_by_name(&self, signal_name: &str)
fn stop_signal_emission_by_name(&self, signal_name: &str)
Stop emission of the currently emitted signal by the (possibly detailed) signal name.
source§fn connect<F>(
&self,
signal_name: &str,
after: bool,
callback: F,
) -> SignalHandlerId
fn connect<F>( &self, signal_name: &str, after: bool, callback: F, ) -> SignalHandlerId
Connect to the signal
signal_name on this object. Read moresource§fn connect_id<F>(
&self,
signal_id: SignalId,
details: Option<Quark>,
after: bool,
callback: F,
) -> SignalHandlerId
fn connect_id<F>( &self, signal_id: SignalId, details: Option<Quark>, after: bool, callback: F, ) -> SignalHandlerId
Connect to the signal
signal_id on this object. Read moresource§fn connect_local<F>(
&self,
signal_name: &str,
after: bool,
callback: F,
) -> SignalHandlerId
fn connect_local<F>( &self, signal_name: &str, after: bool, callback: F, ) -> SignalHandlerId
Connect to the signal
signal_name on this object. Read moresource§fn connect_local_id<F>(
&self,
signal_id: SignalId,
details: Option<Quark>,
after: bool,
callback: F,
) -> SignalHandlerId
fn connect_local_id<F>( &self, signal_id: SignalId, details: Option<Quark>, after: bool, callback: F, ) -> SignalHandlerId
Connect to the signal
signal_id on this object. Read moresource§unsafe fn connect_unsafe<F>(
&self,
signal_name: &str,
after: bool,
callback: F,
) -> SignalHandlerId
unsafe fn connect_unsafe<F>( &self, signal_name: &str, after: bool, callback: F, ) -> SignalHandlerId
Connect to the signal
signal_name on this object. Read moresource§unsafe fn connect_unsafe_id<F>(
&self,
signal_id: SignalId,
details: Option<Quark>,
after: bool,
callback: F,
) -> SignalHandlerId
unsafe fn connect_unsafe_id<F>( &self, signal_id: SignalId, details: Option<Quark>, after: bool, callback: F, ) -> SignalHandlerId
Connect to the signal
signal_id on this object. Read moresource§fn connect_closure(
&self,
signal_name: &str,
after: bool,
closure: RustClosure,
) -> SignalHandlerId
fn connect_closure( &self, signal_name: &str, after: bool, closure: RustClosure, ) -> SignalHandlerId
Connect a closure to the signal
signal_name on this object. Read moresource§fn connect_closure_id(
&self,
signal_id: SignalId,
details: Option<Quark>,
after: bool,
closure: RustClosure,
) -> SignalHandlerId
fn connect_closure_id( &self, signal_id: SignalId, details: Option<Quark>, after: bool, closure: RustClosure, ) -> SignalHandlerId
Connect a closure to the signal
signal_id on this object. Read moresource§fn watch_closure(&self, closure: &impl AsRef<Closure>)
fn watch_closure(&self, closure: &impl AsRef<Closure>)
Limits the lifetime of
closure to the lifetime of the object. When
the object’s reference count drops to zero, the closure will be
invalidated. An invalidated closure will ignore any calls to
invoke_with_values, or
invoke when using Rust closures.source§fn emit<R>(&self, signal_id: SignalId, args: &[&dyn ToValue]) -> Rwhere
R: TryFromClosureReturnValue,
fn emit<R>(&self, signal_id: SignalId, args: &[&dyn ToValue]) -> Rwhere
R: TryFromClosureReturnValue,
Emit signal by signal id. Read more
source§fn emit_with_values(&self, signal_id: SignalId, args: &[Value]) -> Option<Value>
fn emit_with_values(&self, signal_id: SignalId, args: &[Value]) -> Option<Value>
Same as
Self::emit but takes Value for the arguments.source§fn emit_by_name<R>(&self, signal_name: &str, args: &[&dyn ToValue]) -> Rwhere
R: TryFromClosureReturnValue,
fn emit_by_name<R>(&self, signal_name: &str, args: &[&dyn ToValue]) -> Rwhere
R: TryFromClosureReturnValue,
Emit signal by its name. Read more
source§fn emit_by_name_with_values(
&self,
signal_name: &str,
args: &[Value],
) -> Option<Value>
fn emit_by_name_with_values( &self, signal_name: &str, args: &[Value], ) -> Option<Value>
Emit signal by its name. Read more
source§fn emit_by_name_with_details<R>(
&self,
signal_name: &str,
details: Quark,
args: &[&dyn ToValue],
) -> Rwhere
R: TryFromClosureReturnValue,
fn emit_by_name_with_details<R>(
&self,
signal_name: &str,
details: Quark,
args: &[&dyn ToValue],
) -> Rwhere
R: TryFromClosureReturnValue,
Emit signal by its name with details. Read more
source§fn emit_by_name_with_details_and_values(
&self,
signal_name: &str,
details: Quark,
args: &[Value],
) -> Option<Value>
fn emit_by_name_with_details_and_values( &self, signal_name: &str, details: Quark, args: &[Value], ) -> Option<Value>
Emit signal by its name with details. Read more
source§fn emit_with_details<R>(
&self,
signal_id: SignalId,
details: Quark,
args: &[&dyn ToValue],
) -> Rwhere
R: TryFromClosureReturnValue,
fn emit_with_details<R>(
&self,
signal_id: SignalId,
details: Quark,
args: &[&dyn ToValue],
) -> Rwhere
R: TryFromClosureReturnValue,
Emit signal by signal id with details. Read more
source§fn emit_with_details_and_values(
&self,
signal_id: SignalId,
details: Quark,
args: &[Value],
) -> Option<Value>
fn emit_with_details_and_values( &self, signal_id: SignalId, details: Quark, args: &[Value], ) -> Option<Value>
Emit signal by signal id with details. Read more
source§fn disconnect(&self, handler_id: SignalHandlerId)
fn disconnect(&self, handler_id: SignalHandlerId)
Disconnect a previously connected signal handler.
source§fn connect_notify<F>(&self, name: Option<&str>, f: F) -> SignalHandlerId
fn connect_notify<F>(&self, name: Option<&str>, f: F) -> SignalHandlerId
Connect to the
notify signal of the object. Read moresource§fn connect_notify_local<F>(&self, name: Option<&str>, f: F) -> SignalHandlerId
fn connect_notify_local<F>(&self, name: Option<&str>, f: F) -> SignalHandlerId
Connect to the
notify signal of the object. Read moresource§unsafe fn connect_notify_unsafe<F>(
&self,
name: Option<&str>,
f: F,
) -> SignalHandlerId
unsafe fn connect_notify_unsafe<F>( &self, name: Option<&str>, f: F, ) -> SignalHandlerId
Connect to the
notify signal of the object. Read moresource§fn notify(&self, property_name: &str)
fn notify(&self, property_name: &str)
Notify that the given property has changed its value. Read more
source§fn notify_by_pspec(&self, pspec: &ParamSpec)
fn notify_by_pspec(&self, pspec: &ParamSpec)
Notify that the given property has changed its value. Read more
source§fn add_weak_ref_notify<F>(&self, f: F) -> WeakRefNotify<T>
fn add_weak_ref_notify<F>(&self, f: F) -> WeakRefNotify<T>
Add a callback to be notified when the Object is disposed.
source§fn add_weak_ref_notify_local<F>(&self, f: F) -> WeakRefNotify<T>where
F: FnOnce() + 'static,
fn add_weak_ref_notify_local<F>(&self, f: F) -> WeakRefNotify<T>where
F: FnOnce() + 'static,
Add a callback to be notified when the Object is disposed. Read more
source§fn bind_property<'a, 'f, 't, O>(
&'a self,
source_property: &'a str,
target: &'a O,
target_property: &'a str,
) -> BindingBuilder<'a, 'f, 't>where
O: ObjectType,
fn bind_property<'a, 'f, 't, O>(
&'a self,
source_property: &'a str,
target: &'a O,
target_property: &'a str,
) -> BindingBuilder<'a, 'f, 't>where
O: ObjectType,
source§unsafe fn run_dispose(&self)
unsafe fn run_dispose(&self)
Runs the dispose mechanism of the object. Read more
source§impl<T> PropertyGet for Twhere
T: HasParamSpec,
impl<T> PropertyGet for Twhere
T: HasParamSpec,
source§impl<T> StaticTypeExt for Twhere
T: StaticType,
impl<T> StaticTypeExt for Twhere
T: StaticType,
source§fn ensure_type()
fn ensure_type()
Ensures that the type has been registered with the type system.
source§impl<O> TimelineElementExt for Owhere
O: IsA<TimelineElement>,
impl<O> TimelineElementExt for Owhere
O: IsA<TimelineElement>,
source§fn add_child_property(
&self,
pspec: impl AsRef<ParamSpec>,
child: &impl IsA<Object>,
) -> Result<(), BoolError>
fn add_child_property( &self, pspec: impl AsRef<ParamSpec>, child: &impl IsA<Object>, ) -> Result<(), BoolError>
Register a property of a child of the element to allow it to be
written with
set_child_property() and read with
child_property(). A change in the property
will also appear in the deep-notify signal. Read morefn copy(&self, deep: bool) -> TimelineElement
source§fn edit(
&self,
layers: &[Layer],
new_layer_priority: i64,
mode: EditMode,
edge: Edge,
position: u64,
) -> bool
fn edit( &self, layers: &[Layer], new_layer_priority: i64, mode: EditMode, edge: Edge, position: u64, ) -> bool
See
edit_full(), which also gives an error. Read moresource§fn edit_full(
&self,
new_layer_priority: i64,
mode: EditMode,
edge: Edge,
position: u64,
) -> Result<(), Error>
fn edit_full( &self, new_layer_priority: i64, mode: EditMode, edge: Edge, position: u64, ) -> Result<(), Error>
Edits the element within its timeline by adjusting its
start, duration or
in-point, and potentially doing the same for
other elements in the timeline. See EditMode for details about each
edit mode. An edit may fail if it would place one of these properties
out of bounds, or if it would place the timeline in an unsupported
configuration. Read moresource§fn child_property(&self, property_name: &str) -> Option<Value>
fn child_property(&self, property_name: &str) -> Option<Value>
Gets the property of a child of the element. Read more
source§fn child_property_by_pspec(&self, pspec: impl AsRef<ParamSpec>) -> Value
fn child_property_by_pspec(&self, pspec: impl AsRef<ParamSpec>) -> Value
Gets the property of a child of the element. Specifically, the property
corresponding to the
pspec used in
add_child_property() is copied into value. Read moresource§fn layer_priority(&self) -> u32
fn layer_priority(&self) -> u32
source§fn max_duration(&self) -> Option<ClockTime>
fn max_duration(&self) -> Option<ClockTime>
Gets the
max-duration for the element. Read moresource§fn natural_framerate(&self) -> Option<(i32, i32)>
fn natural_framerate(&self) -> Option<(i32, i32)>
Get the “natural” framerate of
self. This is to say, for example
for a VideoUriSource the framerate of the source. Read moresource§fn toplevel_parent(&self) -> TimelineElement
fn toplevel_parent(&self) -> TimelineElement
source§fn track_types(&self) -> TrackType
fn track_types(&self) -> TrackType
Gets the track types that the element can interact with, i.e. the type
of
Track it can exist in, or will create TrackElement-s for. Read moresource§fn list_children_properties(&self) -> Vec<ParamSpec>
fn list_children_properties(&self) -> Vec<ParamSpec>
Get a list of children properties of the element, which is a list of
all the specifications passed to
add_child_property(). Read moresource§fn lookup_child(&self, prop_name: &str) -> Option<(Object, ParamSpec)>
fn lookup_child(&self, prop_name: &str) -> Option<(Object, ParamSpec)>
Looks up a child property of the element. Read more
source§fn paste(&self, paste_position: ClockTime) -> Result<TimelineElement, BoolError>
fn paste(&self, paste_position: ClockTime) -> Result<TimelineElement, BoolError>
Paste an element inside the same timeline and layer as
self. self
must be the return of ges_timeline_element_copy() with deep=TRUE,
and it should not be changed before pasting.
self is not placed in the timeline, instead a new element is created,
alike to the originally copied element. Note that the originally
copied element must stay within the same timeline and layer, at both
the point of copying and pasting. Read moresource§fn remove_child_property(
&self,
pspec: impl AsRef<ParamSpec>,
) -> Result<(), BoolError>
fn remove_child_property( &self, pspec: impl AsRef<ParamSpec>, ) -> Result<(), BoolError>
Remove a child property from the element.
pspec should be a
specification that was passed to
add_child_property(). The corresponding property
will no longer be registered as a child property for the element. Read moresource§fn ripple(&self, start: ClockTime) -> Result<(), BoolError>
fn ripple(&self, start: ClockTime) -> Result<(), BoolError>
Edits the start time of an element within its timeline in ripple mode.
See
edit() with EditMode::Ripple and
Edge::None. Read moresource§fn ripple_end(&self, end: ClockTime) -> Result<(), BoolError>
fn ripple_end(&self, end: ClockTime) -> Result<(), BoolError>
Edits the end time of an element within its timeline in ripple mode.
See
edit() with EditMode::Ripple and
Edge::End. Read moresource§fn roll_end(&self, end: ClockTime) -> Result<(), BoolError>
fn roll_end(&self, end: ClockTime) -> Result<(), BoolError>
Edits the end time of an element within its timeline in roll mode.
See
edit() with EditMode::Roll and
Edge::End. Read moresource§fn roll_start(&self, start: ClockTime) -> Result<(), BoolError>
fn roll_start(&self, start: ClockTime) -> Result<(), BoolError>
Edits the start time of an element within its timeline in roll mode.
See
edit() with EditMode::Roll and
Edge::Start. Read moresource§fn set_child_property(
&self,
property_name: &str,
value: &Value,
) -> Result<(), BoolError>
fn set_child_property( &self, property_name: &str, value: &Value, ) -> Result<(), BoolError>
See
set_child_property_full(), which also gives an
error. Read moresource§fn set_child_property_by_pspec(
&self,
pspec: impl AsRef<ParamSpec>,
value: &Value,
)
fn set_child_property_by_pspec( &self, pspec: impl AsRef<ParamSpec>, value: &Value, )
Sets the property of a child of the element. Specifically, the property
corresponding to the
pspec used in
add_child_property() is set to value. Read moresource§fn set_child_property_full(
&self,
property_name: &str,
value: &Value,
) -> Result<(), Error>
fn set_child_property_full( &self, property_name: &str, value: &Value, ) -> Result<(), Error>
Sets the property of a child of the element. Read more
source§fn set_inpoint(&self, inpoint: ClockTime) -> bool
fn set_inpoint(&self, inpoint: ClockTime) -> bool
Sets
in-point for the element. If the new in-point
is above the current max-duration of the element,
this method will fail. Read moresource§fn set_max_duration(&self, maxduration: impl Into<Option<ClockTime>>) -> bool
fn set_max_duration(&self, maxduration: impl Into<Option<ClockTime>>) -> bool
Sets
max-duration for the element. If the new
maximum duration is below the current in-point of
the element, this method will fail. Read moresource§fn set_parent(
&self,
parent: &impl IsA<TimelineElement>,
) -> Result<(), BoolError>
fn set_parent( &self, parent: &impl IsA<TimelineElement>, ) -> Result<(), BoolError>
source§fn set_priority(&self, priority: u32) -> bool
fn set_priority(&self, priority: u32) -> bool
👎Deprecated: Since 1.10
Sets the priority of the element within the containing layer. Read more
source§fn trim(&self, start: ClockTime) -> Result<(), BoolError>
fn trim(&self, start: ClockTime) -> Result<(), BoolError>
Edits the start time of an element within its timeline in trim mode.
See
edit() with EditMode::Trim and
Edge::Start. Read moresource§fn in_point(&self) -> u64
fn in_point(&self) -> u64
The initial offset to use internally when outputting content (in
nanoseconds, but in the time coordinates of the internal content). Read more
source§fn set_in_point(&self, in_point: u64)
fn set_in_point(&self, in_point: u64)
The initial offset to use internally when outputting content (in
nanoseconds, but in the time coordinates of the internal content). Read more
source§fn is_serialize(&self) -> bool
fn is_serialize(&self) -> bool
Whether the element should be serialized.
source§fn set_serialize(&self, serialize: bool)
fn set_serialize(&self, serialize: bool)
Whether the element should be serialized.
source§fn connect_child_property_added<F: Fn(&Self, &Object, &ParamSpec) + 'static>(
&self,
f: F,
) -> SignalHandlerId
fn connect_child_property_added<F: Fn(&Self, &Object, &ParamSpec) + 'static>( &self, f: F, ) -> SignalHandlerId
Emitted when the element has a new child property registered. See
add_child_property(). Read moresource§fn connect_child_property_removed<F: Fn(&Self, &Object, &ParamSpec) + 'static>(
&self,
f: F,
) -> SignalHandlerId
fn connect_child_property_removed<F: Fn(&Self, &Object, &ParamSpec) + 'static>( &self, f: F, ) -> SignalHandlerId
Emitted when the element has a child property unregistered. See
remove_child_property(). Read moresource§fn connect_deep_notify<F: Fn(&Self, &Object, &ParamSpec) + 'static>(
&self,
detail: Option<&str>,
f: F,
) -> SignalHandlerId
fn connect_deep_notify<F: Fn(&Self, &Object, &ParamSpec) + 'static>( &self, detail: Option<&str>, f: F, ) -> SignalHandlerId
Emitted when a child of the element has one of its registered
properties set. See
add_child_property().
Note that unlike notify, a child property name can not be
used as a signal detail. Read morefn connect_duration_notify<F: Fn(&Self) + 'static>( &self, f: F, ) -> SignalHandlerId
fn connect_in_point_notify<F: Fn(&Self) + 'static>( &self, f: F, ) -> SignalHandlerId
fn connect_max_duration_notify<F: Fn(&Self) + 'static>( &self, f: F, ) -> SignalHandlerId
fn connect_name_notify<F: Fn(&Self) + 'static>(&self, f: F) -> SignalHandlerId
fn connect_parent_notify<F: Fn(&Self) + 'static>(&self, f: F) -> SignalHandlerId
source§fn connect_priority_notify<F: Fn(&Self) + 'static>(
&self,
f: F,
) -> SignalHandlerId
fn connect_priority_notify<F: Fn(&Self) + 'static>( &self, f: F, ) -> SignalHandlerId
👎Deprecated: Since 1.10
fn connect_serialize_notify<F: Fn(&Self) + 'static>( &self, f: F, ) -> SignalHandlerId
fn connect_start_notify<F: Fn(&Self) + 'static>(&self, f: F) -> SignalHandlerId
fn connect_timeline_notify<F: Fn(&Self) + 'static>( &self, f: F, ) -> SignalHandlerId
source§impl<O> TransitionClipExt for Owhere
O: IsA<TransitionClip>,
impl<O> TransitionClipExt for Owhere
O: IsA<TransitionClip>,
source§fn vtype(&self) -> VideoStandardTransitionType
fn vtype(&self) -> VideoStandardTransitionType
a
VideoStandardTransitionType representing the wipe to usesource§fn set_vtype(&self, vtype: VideoStandardTransitionType)
fn set_vtype(&self, vtype: VideoStandardTransitionType)
a
VideoStandardTransitionType representing the wipe to use